12
12 items
₹292.00
Subtotal: ₹292.00
12
Subtotal: ₹292.00
MPX10DP Differential Pressure Sensor
In Stock
SKU:009532- Patented silicon shear stress strain gauge design
- Ratiometric to supply voltage
- Durable Epoxy Unibody Element or Thermoplastic (PPS) Surface Mount Package
TTP229 16 Channel Capacitive Touch Module
In Stock
SKU:009527- This 16 switch digital touch sensor module is based on a touch sensing IV TTP229.
- This device has a built-in regulator for the touch sensor. We can add interfaces through the non-conductive dielectric material.
- Two modes: Simple 8 key mode with independent 8 Channel parallel output. and Advanced 16 Key modes with I2C interface output.
- The card has outputs of each key and communication with 2 wires, so it is not necessary to use more than 2 wires to communicate with the microcontroller or arduino
TTP223B Capacitive Touch Sensor Module
In Stock
SKU:009522- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
KY-036 Metal Touch Sensor
In Stock
SKU:009517- The KY-036 Touch Sensor is a single-channel signal output.
- This metal touch sensor uses low-level output signal for human body touch sensor alarm.
- The KY-036 metal sensor has an adjustable sensitivity.
- This touch sensor is integrated with LM393 chip and working voltage.
MPR121 – 12 Channel Capacitive Touch Sensor
In Stock
SKU:009512- The operating voltage is 2.5v - 3.6v
- 29μA supply current at 16ms sample period.
- 3μA shutdown current
- 12 electrodes
- The operating temperature range is -40°C to +85°C.
BMP280 Sensor Module
In Stock
SKU:009507- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
Square Force-Sensitive Resistor – Original
In Stock
SKU:009500- Just Connect a resistor to form a voltage devider and meassure the voltage at the junction to find the force applied.
- These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate.
- Use them to sense if it's being squeezed, but you may not want to use it as a scale.
FST 5.08mm Circle Force Sensor (Original)
In Stock
SKU:009496- Precision Detection: Ideal for sensing human touch, gaming input, medical applications, and navigation controls.
- Flexible: Ensures durability and suitability for various applications.
- Compact Design: Low-profile and small diameter for simple integration.
- Wide Force Range: Measures subtle touches to stronger grips (0.1N to 10N).
- Reliable: Over 1 million actuation cycles and +-10% repeatability.
- Versatile: Suitable for industrial use, monitoring loads on machinery, etc.
- Temperature Resistant: Operates from -30°C to +70°C.
Square shaped Force Sensor
In Stock
SKU:009490- The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc.
- Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.
- This pressure sensor has the characteristic of high stability, high consistency.
- Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. When sensor detects outside pressure, the resistance of sensor will change.
- Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
load cell ( 3 KG )
In Stock
SKU:009485- Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.
- The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
HX711 Load Cell Module
In Stock
SKU:009479- Recommended excitation voltage is 5-10V.
- Two selectable differential input channels.
- On-chip active low noise PGA with a selectable gain of 32, 64 and 128.
- On-chip power supply regulator for load-cell and ADC analog power supply.
- Selectable 10SPS or 80SPS output data rate.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Simple digital control and serial interface: pin-driven controls, no programming needed.
- Simultaneous 50 and 60Hz supply rejection.
GY801 9-Axis Magnetic Acceleration Gyroscope Module
In Stock
SKU:009471- Nine-Axis Module (three-axis gyroscope + triaxial accelerometer + 3-axis magnetic field + pressure).
- Communication: IIC communication protocol (fully compatible with 3-5 V system)
- It can measure acceleration, angular velocity, and the Earth's magnetic field in 3 dimensions
- I2C interface
BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi
In Stock
SKU:009466- Integrates accelerometer, gyroscope, and magnetometer
- Advanced sensor fusion algorithm for accurate 9-DOF orientation data
- I2C Qwiic interface for easy plug-and-play integration
- Operating voltage: 3.3V to 5.0V
- Low power consumption for energy-efficient designs
- Compact and easy to embed in robotics, drones, IoT, and AR/VR applications
- Real-time measurement of acceleration, angular rate, and magnetic field strength
ADXL345 Accelerometer Module
In Stock
SKU:009460- 3V-6V DC Supply Voltage
- Onboard LDO Voltage regulator
- Built in Voltage level convertor (MOSFET based)
- Can be interface with 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- SPI and I2C interfaces
GY-53 VL53L0X Laser ToF Flight Time Range Sensor
In Stock
SKU:009456- Serial port and PWM to read the data code: STM32, 51 MCU.
- Default configuration: serial baud rate 9600, automatic output, high precision mode.
- Range: 2 meters (dark, long-distance mode)
- It is able to function in multi-module applications.
ADXL335 Triple-Axis Accelerometer
In Stock
SKU:009451- Onboard LDO Voltage regulator and Power LED
- Can be interfaced with 3.3V or 5V Microcontroller.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Features Tap/Double Tap Detection and Free-Fall Detection
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- The appropriate bandwidth can be selected according to the application. The bandwidth of the X and Y axis ranges from 0.5 Hz to 1600 Hz, and the bandwidth of the Z axis ranges from 0.5 Hz to 550 Hz.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















