0
0 items
₹0.00
No products in the cart.
L293D Motor Driver Module
In Stock
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor
In Stock
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
In Stock
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
Raspberry Pi Zero W (Wireless) With In-Built Wifi and Bluetooth
In Stock
- Operating Power: 5 V/2.5 A DC via micro USB
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
OE-775 Hall Effect Two Channel Magnetic Encoder
In Stock
801S Vibration Shock Sensor Module
In Stock
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
Raspberry Pi Compute Module 4 I/O Board
In Stock
- External power connector (+12V, +5V)
- 2 x full-size HDMI 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- Micro USB socket for updating Compute Module 4
- PCIe Gen 2 x1 socket
JGB37-520 DC6V 960 RPM Miniature Speed Reduction Gear DC Motor
In Stock
- Motor model:JGB37-520
- Rated voltage:6V DC
- Revolving Speed: 960RPM
- Rated Torque: 0.07 kg. cm
- Stall Torque: 0.28 kg. cm
- Rated Current: 50 mA
- Stall Current: 1.5A
Tactile Push Button Switch Assorted Kit – 25 pcs
In Stock
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
Multi Coin Acceptor Programable for Vending Machines
In Stock
HC-SR04 Ultrasonic range finder with cartoon Ultrasonic Sensor mounting Bracket
In Stock
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 4500 cm
- Frequency: 40 KHz
- Thickness: 2.8-3.1 mm
- The diameter of mounting hole: 3.8mm
- Mounting Bracket Material: acrylic
12V 60 RPM Side Shaft High Torque Motor (Original & new)
In Stock

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















