0
0 items
₹0.00
No products in the cart.
Flat 1034 Mobile Phone Vibrator Motor
In Stock
SKU:009683- Voltage Range: DC 2.5-4V.
- Motor Diameter: 10 mm.
- Motor Thickness: 3.4 mm.
- Min. Rated Speed: 9000RPM
- Max. Rated Current: 90mA
MX1919 Based Motor Driver Module – 2.5A
In Stock
SKU:007737- Operating Voltage: 2 – 10VDC
- Operating Current: 2.5A (max)
- Compatible With Arduino and Raspberry Pi
- 2 Pin Connectors for Motors and supply
TB6612 D1 Motor Driver Shield
In Stock
SKU:007732- Interface: I2C
- Power supply voltage: VM = 15V max
- Output current: Iout = 1.2A ( average ) / 3.2A ( peak )
- Standby control to save power CW / CCW / short brake / stop motor control modes
- Standby control mode-I2C mode: control TB6612’s STBY with I2C protocol
- IO mode: control TB6612’s STBY with Spin
Waveshare General Driver board for Robots, Based on ESP32
In Stock
SKU:007727- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery
Motor Forward and Reverse Rotation Controller Board Solenoid Valve Pump Remote Control Circuit Switch Two-Wire
In Stock
SKU:007724- Product name: forward motor, reverse rotation motor control board module
- Product size: 91mm * 42mm * 19 mm (length, width and height)
- Voltage range: DC 7~30v
- Current range: within 10a; Two wire motor forward and reverse rotation
Forward/Reverse Motor Controller Board 12V 24V Motor Two Relay Delay Timing Cycle YYB-5 Module
In Stock
SKU:007720- Current Rating: 30 Amps
- Operation Mode: Automatic
- Coil Voltage: 24 Volts
- Model: YYB-5
- Input voltage: DC/ AC7V~27V
- Time range: 0.1 seconds to 999 minutes
DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire
In Stock
SKU:007714- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
DC15V-36V-15A 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board with Hall Drive
In Stock
SKU:007708- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch Control Driver Digital Display
In Stock
SKU:007701- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
In Stock
SKU:007697- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
In Stock
SKU:007691- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
DC Motor Governor PWM Variable Speed Control Switch 6V-90V 15A DC Motor Governor PWM Variable Speed Control Switch 6V-90V 15A
In Stock
SKU:007684Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
In Stock
SKU:007677- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V
In Stock
SKU:007673- Maximum Output Power: 2000W
- Maximum Output Current: 40A
- Power Supply: 9-50VDC
- High Quality ABS Case.
TA6586 Based Motor Driver Module
In Stock
SKU:007669- Operating Voltage: 3 -14VDC
- Operating Current: 5A (max)
- Compatible With Arduino and Raspberry Pi
- Heavy-Duty Screw Terminal for supply
- Can be connected directly to the output of 433MHz receiver
20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
In Stock
SKU:007664- Adjustable speed range: 0%-100%.
- Speed adjustment way: Potentiometer.
- Output voltage: Linear under load.
- Speed control type: Basins.
- Output voltage: Load Linear
- Type: Adjusting flow
- The motor running condition adjustment: Forward / Stop / Reverse

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















