0
0 items
₹0.00
No products in the cart.
DS3231 RTC Module Precise Real Time Clock I2C AT24C32
In Stock
SKU:005254- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
OE-775 Hall Effect Two Channel Magnetic Encoder
Out of stock
SKU:006390BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi
Out of stock
SKU:009466- Integrates accelerometer, gyroscope, and magnetometer
- Advanced sensor fusion algorithm for accurate 9-DOF orientation data
- I2C Qwiic interface for easy plug-and-play integration
- Operating voltage: 3.3V to 5.0V
- Low power consumption for energy-efficient designs
- Compact and easy to embed in robotics, drones, IoT, and AR/VR applications
- Real-time measurement of acceleration, angular rate, and magnetic field strength
Raspberry Pi 4 Model-B with 1 GB RAM
In Stock
SKU:005340- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
BMP280 Sensor Module
Out of stock
SKU:009507- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
DFRobot Gravity Analog Water Pressure Sensor Module
Out of stock
SKU:009427- Measure water pressure accurately with this Arduino water sensor.
- Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
- Build smart water systems by combining with solenoid valves and other sensors.
- Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
- Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
- Perfect for IoT water pressure monitoring projects and smart home control systems.
- Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
Raspberry Pi 5 Model B 2GB RAM
In Stock
SKU:005406- Made in India 32-bit Arduino board with WiFi and Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- Built-in 12×8 programmable LED matrix for animations and games.
- Operating voltage: 5V, supports 6-24V input and USB-C.
- Advanced peripherals: DAC, CAN bus, 14-bit ADC.
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
In Stock
SKU:004972- Operating Voltage: 5V
- MCU: ATMEGA 328P
- Input Voltage (recommended): 7-12V.
- Input Voltage (limit): 6-20V.
- Digital I/O Pins: 14
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
HMC5883L Triple Axis Compass
In Stock
SKU:009446- This compact sensor fits into small projects such as UAVs and robot navigation systems.
- The sensor converts any magnetic field to a differential voltage output on 3 axes.
- This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
- A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
W1209 Digital Temperature Controller Thermostat Module
In Stock
SKU:009233- Get full control over your project with a massive temperature range, from a freezing -50°C all the way to 110°C.
- No need to buy a separate sensor! A high-quality, waterproof temperature probe is already included in the package.
- Setting it up is very simple; just use the simple '+' and '-' buttons, no coding knowledge needed at all.
- Easily connect and control both your home AC appliances and 12V DC devices like fans, coolers, or pumps.
- Fine-tune your system perfectly with advanced options for heating/cooling modes, timer delays, and safety alarms.
- A proper device for students and DIY makers, perfect for building everything from egg incubators to automatic room coolers.
XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe
In Stock
SKU:009208- The XH-W3001 digital thermostat switch needs a supply voltage of 12V and produces a power of 120W.
- This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
- All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
- It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.
- The 12V XH-W3001 temperature controller is best used for heating control in refrigeration and suitable for seafood machines.
Official Raspberry Pi 5 4GB Starter Kit
Out of stock
SKU:008154- Raspberry Pi 5 Model 4GB, perfect for diverse projects.
- Perfect for programming, gaming, and home automation.
- Encourages skill development, suitable for all age ranges.
- Suitable for beginners, experts, and DIY enthusiasts.
- Ensure stable power delivery with the official white 27W USB-C PD Power Supply.
- Connect effortlessly with the official Micro-HDMI to Standard HDMI Cable for crisp visuals.
- The Raspberry Pi 5 Starter Kit is easy to use and maintain.
Official Raspberry Pi 5 Model 8GB RAM
Out of stock
SKU:008124- 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU.
- VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2.
- Dual 4Kp60 HDMI display output.
- 4Kp60 HEVC decoder.
- Dual-band 802.11ac Wi-Fi.
- Bluetooth 5.0 / Bluetooth Low Energy (BLE).
- High-speed microSD card interface with SDR104 mode support.
- 1 year manufacturer warranty against manufacturing defects.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















