Filter
Sort:
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

Original price was: ₹39.00.Current price is: ₹11.00.
In Stock
SKU:009844
  1. Input interface: Type C
  2. Current Protection: Yes
  3. Charging mode: Linear charging.
  4. Current: 1A adjustable.
  5. Charge precision: 1.5%.
  6. Input voltage: 4.5V-5.5V.
  7. Full charge voltage: 4.2V.
Add to cart
AC-DC Power Supply Module 24V 4A

AC-DC Power Supply Module 24V 4A

Original price was: ₹459.00.Current price is: ₹377.00.
In Stock
SKU:008461
  1. Input voltage: 85-265 V AC
  2. Output voltage: 24V DC
  3. Output current:4A
  4. Output power:80W
  5. Frequency:50HZ/60HZ
Add to cart
10 Wire Male to Female Jumper Wires – 20cm

10 Wire Male to Female Jumper Wires – 20cm

Original price was: ₹29.00.Current price is: ₹8.00.
In Stock
SKU:007431
  1. 10P colored jumper wires
  2. Length: 200mm
  3. Weight: 10 gm
  4. Compatible with 2.54mm spacing pin headers
  5. High quality and in good working condition
  6. Durable and reusable
  7. Easy to install and use
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
Raspberry Pi 4 Model-B with 1 GB RAM

Raspberry Pi 4 Model-B with 1 GB RAM

Original price was: ₹5,799.00.Current price is: ₹4,850.00.
In Stock
SKU:005340
Add to cart
Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

₹83.00
In Stock
SKU:005147
  1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
  2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
  3. An IC pattern for adding DIP ICs up to 20 pins
  4. Power rails down the middle and sides
  5. A reset button and an extra general use button
Add to cart
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long

Original price was: ₹199.00.Current price is: ₹157.00.
Out of stock
SKU:007591
  1. Qwiic to 0.1″ header cable
  2. Supports I2C (SDA/SCL)
  3. Color-coded: 3.3V, GND, SDA, SCL
  4. Flexible, easy prototyping
Read more
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

Original price was: ₹499.00.Current price is: ₹346.00.
In Stock
SKU:006798
  • Equips you with robust Wi-Fi and Bluetooth capabilities.
  • Can easily integrate into other products with 30-pin design.
  • Choose between AP, STA, or AP+STA modes.
  • The support for Lua programming simplifies development.
  • This board includes a CP2102 USB-UART bridge.
  • Powered by the ESP32S chip.
  • Offers scalable and adaptive features with adjustable clock frequencies.
  • Ideal for various applications.
Add to cart
3 Cell 18650 Lithium ion Battery Holder

3 Cell 18650 Lithium ion Battery Holder

₹35.00
In Stock
SKU:AB1001
Add to cart
Raspberry Pi 5 Model B 2GB RAM

Raspberry Pi 5 Model B 2GB RAM

Original price was: ₹9,499.00.Current price is: ₹7,369.00.
In Stock
SKU:005406
Add to cart
Original Arduino UNO EK R4 WiFi – Made in India

Original Arduino UNO EK R4 WiFi – Made in India

₹1,405.00
Out of stock
SKU:005078
  1. Made in India 32-bit Arduino board with WiFi and Bluetooth.
  2. Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
  3. 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
  4. Built-in 12×8 programmable LED matrix for animations and games.
  5. Operating voltage: 5V, supports 6-24V input and USB-C.
  6. Advanced peripherals: DAC, CAN bus, 14-bit ADC.
Read more
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹437.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
eSUN PLA Transparent Glass light blue

eSUN PLA Transparent Glass light blue

Original price was: ₹1,499.00.Current price is: ₹1,399.00.
In Stock
SKU:010497
  1. Diameter : 1.75mm.
  2. Melting point: 210ºc.
  3. Color : Glass Light Blue
  4. Weight : 1 kg.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
Out of stock
SKU:010401
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSun PLA+ 1kg 3D Printing Filament 1.75mm Milky White Color

eSun PLA+ 1kg 3D Printing Filament 1.75mm Milky White Color

Original price was: ₹1,699.00.Current price is: ₹1,299.00.
In Stock
SKU:010315

  • Premium eSUN PLA+ 3D printer filament in Milky White color

  • 1.75mm diameter, 1kg roll with eco-friendly paper spool

  • Enhanced toughness, durability, and superior impact resistance

  • Smooth surface finish with excellent layer adhesion and consistent feeding

  • Easy to print, FDA-approved, and made from biodegradable materials

  • Reduces warping and ensures high-speed, reliable performance
Add to cart

Filter Products

Categories

Filter by price

Product Status