0
0 items
₹0.00
No products in the cart.
ZD850 Hexa-Rotor Frame for Drone
In Stock
SKU:006869- This pure carbon fiber is ideal to withstand your drone standards.
- Ultra-Lightweight and Durable.
- Made by 100% 3K Twill super strong and lightweight carbon fiber.
- The frame has excellent strength.
- The arm has multiple motor mounting holes.
S550 Hexacopter Frame
In Stock
SKU:006858-
Wheelbase: 550mm
-
Weight: 550g/720g(without/with gimbal)
-
Adopts S800 upward tilt arm design – Plastic injection moduling
-
Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
-
It comes with PCB center board of soldered
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
RS555 6000RPM 12V Dc Motor
In Stock
SKU:006849D Shaft 775 12V 12000 RPM/MIN High Speed High Torque DC Motor Dual Shaft
In Stock
SKU:006841 Voltage: 12V DC.
Speed: 12000 RPM for high-speed performance.
Applications: Ideal for robotics, automation, DIY projects, power tools, hobbyist projects, and educational demonstrations.
Reliable Performance.
Versatility: Perfect for projects demanding both speed and torque.
Add to cart
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V AC 100V ~ 240V 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Add to cart
TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality
In Stock
SKU:006826- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 10 kg-cm
- Stall torque @6.6V : 12 kg-cm
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
In Stock
SKU:006819- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)
In Stock
SKU:006798- Equips you with robust Wi-Fi and Bluetooth capabilities.
- Can easily integrate into other products with 30-pin design.
- Choose between AP, STA, or AP+STA modes.
- The support for Lua programming simplifies development.
- This board includes a CP2102 USB-UART bridge.
- Powered by the ESP32S chip.
- Offers scalable and adaptive features with adjustable clock frequencies.
- Ideal for various applications.
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester Rated 5.00 out of 5 based on 1customer rating
In Stock
SKU:006787- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
Heart Rate Pulse Sensor Module
In Stock
SKU:006782- Heart Rate Pulse Sensor Module can be put on the finger or earlobe, through interconnected line can be connected to the Arduino.
- This Pulse Sensor works with a 3V - 5V Arduino.
- Essence is an integrated optical amplifying circuit and noise eliminating circuit heart rate sensor.
- This Pulse Sensor includes the circuits like Amplification & Noise cancellation.
MQ-2 Gas Sensor Module For H2, LPG, CH4, CO, Smoke or Propane Detector Module
In Stock
SKU:006775- Operating Voltage is +5V.
- Used to detect LPG, Alcohol, Propane, Hydrogen, CO, and methane.
- Used as a Digital or analog sensor.
- Sensitivity of Digital pin can be varied using the potentiometer.
- Have a long life.
- It has a Simple drive circuit.
PS2 Joystick Module Breakout Sensor
In Stock
SKU:006768- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
5V 8 Channel SSR Module
Out of stock
SKU:006757- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 V AC.
- Good for lighting, Holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with large current.
- It can be controlled directly by a Microcontroller.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















