0
0 items
₹0.00
No products in the cart.
SOLDRON BN25N3/BN25N1 25 watt Nickel Plated 3mm Soldering Gun Bit
In Stock
SKU:007789- Tip Shape: chisel tip
- Power rating is 25W
- Plated with Nickel
- Durable and Long Life Total Length: 75 mm.
- Weight: 15 gm
- Internal Diameter: 5.30
- Outer Diameter: 8 mm
Soldron 858D Hot Air Soldering Station
In Stock
SKU:007781- Body type: Full metalized Powdered coated.
- Controller: Micro Controller based with 7 segment display with SET and READ mode.
- ESD: Yes safe
- Temperature setting: Push-button
- Fan setting: Knob type
- Blower Cut-off: Automatic on keeping it in the provided cradle.
SOLDRON 8898 Portable Dual Hot Air Soldering Station with wall mounting
In Stock
SKU:007776- Hot air heater
- Welding iron
- 2in1 rework soldering station.
- Dual LCD digital displays
- Extremely low noise
SOLDRON 936 temperature controlled analog soldering station
In Stock
SKU:007771- ESD Safe & LED Indicator.
- Pre-Printed Set & Run Modes on Panel.
- Easy Replaceable Bits, Rubber Grip for Non-Slippery Use & Much Heater for Long Life.
- Sleep Mode: No
SOLDRON 938 temperature controlled digital soldering station
In Stock
SKU:007766- ESD is safe.
- Sleep Mode.
- Microcontroller Based control unit.
- Easy Replaceable bits.
- Rubber grip for non-slippery use.
- MCH heater for long life
Soldron Variable Wattage Micro-Soldering Station
In Stock
SKU:007762- Easy to replace iron bit/tip
- Metallic body for station
- High Grade plastic used for iron
- Pre-printed set and run modes on station
- Most popular for Wax and Jewellery work
Soldron Portable SMPS Variable Wattage Micro Soldering Station
In Stock
SKU:007757- High-Grade Plastic Body Station and Iron
- Pre-Printed Set and Run Modes on station
- Absolutely ESD safe and ideal for SMD/SMT work and rework
- Micro MCH heater for long life
- Heavy-duty cast iron micro soldering stand with sponge
- Third pin for ground on mains plug for added safety
- Premium grade long lasting fine needle bit
Soldron 878D Station
In Stock
SKU:007747- ESD safe.
- Microcontroller-based smart circuit design.
- An integrated blower within the handheld unit.
- Built-in temperature sensor for precise measuring.
- Digitally Controlled.
- Built-in cut-off sensor when placed on Cradle.
- Rubber grip for non-slippery use.
- MCH heater for long life.
MX1919 Based Motor Driver Module – 2.5A
In Stock
SKU:007737- Operating Voltage: 2 – 10VDC
- Operating Current: 2.5A (max)
- Compatible With Arduino and Raspberry Pi
- 2 Pin Connectors for Motors and supply
TB6612 D1 Motor Driver Shield
In Stock
SKU:007732- Interface: I2C
- Power supply voltage: VM = 15V max
- Output current: Iout = 1.2A ( average ) / 3.2A ( peak )
- Standby control to save power CW / CCW / short brake / stop motor control modes
- Standby control mode-I2C mode: control TB6612’s STBY with I2C protocol
- IO mode: control TB6612’s STBY with Spin
Waveshare General Driver board for Robots, Based on ESP32
In Stock
SKU:007727- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery
Motor Forward and Reverse Rotation Controller Board Solenoid Valve Pump Remote Control Circuit Switch Two-Wire
In Stock
SKU:007724- Product name: forward motor, reverse rotation motor control board module
- Product size: 91mm * 42mm * 19 mm (length, width and height)
- Voltage range: DC 7~30v
- Current range: within 10a; Two wire motor forward and reverse rotation
Forward/Reverse Motor Controller Board 12V 24V Motor Two Relay Delay Timing Cycle YYB-5 Module
In Stock
SKU:007720- Current Rating: 30 Amps
- Operation Mode: Automatic
- Coil Voltage: 24 Volts
- Model: YYB-5
- Input voltage: DC/ AC7V~27V
- Time range: 0.1 seconds to 999 minutes
DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire
In Stock
SKU:007714- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
DC15V-36V-15A 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board with Hall Drive
In Stock
SKU:007708- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch Control Driver Digital Display
In Stock
SKU:007701- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















