0
0 items
₹0.00
No products in the cart.
L293D Motor Driver/Servo Shield for Arduino
In Stock
SKU:007172- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
In Stock
SKU:007155- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
DC 5V Ultrasonic Humidifier USB Spray Module DIY Incubation Experiment 108KHz
Out of stock
SKU:007151- DC 24V 36mm Super Ultrasonic Mist Maker Humidifier Atomizer
- Comes with a built-in driver circuit for easy and direct operation
- Automatically starts misting upon power-on (triggered by power supply)
- Operates at 108KHz high-frequency for efficient ultrasonic atomization
- Micron-level spray aperture produces fine 5μm water mist particles
- Glazed surface on the atomizing sheet enhances durability and mist quality
4.8-6V Servo Motor Tester
In Stock
SKU:007139- This is 4.8-6V Servo Motor Tester
- This offer 3 modes to check servos or ESC
- This servo motor tester connect to up to 3 servos simultaneously
- This can connect up to 3 ESCs to test and compare their reaction time respectively
- This servo motor tester is built with LED indicators
Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
In Stock
SKU:007123- Maximum current: 7.2A, resolution: 0.1A
- Impulse response frequency: 200KHz
- DC power supply
- The input voltage range: 20-50 VDC.
- Power supply is greater than 200W. Recommend 20-50 VDC
- Operating Temperature: -10℃~45℃
1.8 Inch TFT LCD Module 128 x 160 with 4 IO
Out of stock
SKU:007121- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 57×34 (LxW)
- Interface Type: SPI
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
In Stock
SKU:007116- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
MP3 Bluetooth 4.1 Decoder Board
Out of stock
SKU:007102- Operating Voltage: 3.7 – 5VDC
- SNR: 90dB
- Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Original JHD 20×4 character LCD Display with Blue Backlight
Out of stock
SKU:007092- This is Original JHD 20×4 character LCD Display with Blue Backlight
- It is an original JHD LCD display with blue backlight and high quality.
- The screen can be used for color, LCD, led light bar, and so on, it is easy to install and disassemble without special tools.
- This module does not require a driver. The LCD screen will display both the character and data.
- Black text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
MT8870 DTMF Voice Decoding Module
Out of stock
SKU:007081- Versatile Compatibility: Works with various DTMF signals, ideal for modems, mobile radios, and more.
- User-Friendly Design: Onboard LEDs for clear signal state and adjustable timing for accurate decoding.
- Wide Applications: Integrates easily with Arduino boards (UNO, MEGA2560, DUE) for diverse projects.
- Central Office Quality: Delivers excellent performance with an internal amplifier for optimal signal reception.
- Convenient Input: Accepts both 3.5mm jack and voice input for seamless operation.
- Multi-Channel Output: 12 dedicated outputs for phone keys (0-9, *, #) and 4 additional outputs for software control.
Blackboard VHM-314 Bluetooth 5.0 MP3 Decoder Board (Type C)
Out of stock
SKU:007066Wuzhi Audio ZK-MT21 Bluetooth 5.0 Subwoofer Amplifier Board 50WX2+100W 2.1 Channel Power Audio Stereo Amplifier Tone Board Bass AMP AUX
Out of stock
SKU:007061 Product Name: 2.1 channel audio amplifier module
Product Model: ZK-MT21
Bluetooth Version: 5.0 (no shielding, 15 meters)
Input Sensitivity: 500mV
Audio Input: AUX + Bluetooth
Channel: 2.1
Chip Solution: Domestic power amplifier chip
Power Range: DC 12-20 V / 5A above (Do not connect to 24V battery pack)
Adapter Speaker: 20-100 W, 4-8 Ω
Output Power: Left and right channels <50W, Subwoofer <100W
Read more
TPA3118 PBTL Mono Digital Amplifier
Out of stock
SKU:007050- Working Voltage: DC 8-24V
- Power Output: 60W
- Applicable Speaker Impedance: 4-8 Ω
- Sound quality is very good by using this module.
- Mono digital audio power amplifier chip.
- High output and low power consumption.
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















