0
0 items
₹0.00
No products in the cart.
Soldron Variable Wattage Micro-Soldering Station
In Stock
SKU:007762- Easy to replace iron bit/tip
- Metallic body for station
- High Grade plastic used for iron
- Pre-printed set and run modes on station
- Most popular for Wax and Jewellery work
Soldron Portable SMPS Variable Wattage Micro Soldering Station
In Stock
SKU:007757- High-Grade Plastic Body Station and Iron
- Pre-Printed Set and Run Modes on station
- Absolutely ESD safe and ideal for SMD/SMT work and rework
- Micro MCH heater for long life
- Heavy-duty cast iron micro soldering stand with sponge
- Third pin for ground on mains plug for added safety
- Premium grade long lasting fine needle bit
Soldron 878D Station
In Stock
SKU:007747- ESD safe.
- Microcontroller-based smart circuit design.
- An integrated blower within the handheld unit.
- Built-in temperature sensor for precise measuring.
- Digitally Controlled.
- Built-in cut-off sensor when placed on Cradle.
- Rubber grip for non-slippery use.
- MCH heater for long life.
MX1919 Based Motor Driver Module – 2.5A
In Stock
SKU:007737- Operating Voltage: 2 – 10VDC
- Operating Current: 2.5A (max)
- Compatible With Arduino and Raspberry Pi
- 2 Pin Connectors for Motors and supply
TB6612 D1 Motor Driver Shield
In Stock
SKU:007732- Interface: I2C
- Power supply voltage: VM = 15V max
- Output current: Iout = 1.2A ( average ) / 3.2A ( peak )
- Standby control to save power CW / CCW / short brake / stop motor control modes
- Standby control mode-I2C mode: control TB6612’s STBY with I2C protocol
- IO mode: control TB6612’s STBY with Spin
Waveshare General Driver board for Robots, Based on ESP32
In Stock
SKU:007727- Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
- Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
- Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
- Onboard 9-axis IMU to obtain attitude and heading information at any time
- Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery
Motor Forward and Reverse Rotation Controller Board Solenoid Valve Pump Remote Control Circuit Switch Two-Wire
In Stock
SKU:007724- Product name: forward motor, reverse rotation motor control board module
- Product size: 91mm * 42mm * 19 mm (length, width and height)
- Voltage range: DC 7~30v
- Current range: within 10a; Two wire motor forward and reverse rotation
Forward/Reverse Motor Controller Board 12V 24V Motor Two Relay Delay Timing Cycle YYB-5 Module
In Stock
SKU:007720- Current Rating: 30 Amps
- Operation Mode: Automatic
- Coil Voltage: 24 Volts
- Model: YYB-5
- Input voltage: DC/ AC7V~27V
- Time range: 0.1 seconds to 999 minutes
DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire
In Stock
SKU:007714- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
DC15V-36V-15A 500W Brushless Motor Controller Hall Motor Balanced Car Driver Board with Hall Drive
In Stock
SKU:007708- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch Control Driver Digital Display
In Stock
SKU:007701- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
In Stock
SKU:007697- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
In Stock
SKU:007691- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
DC Motor Governor PWM Variable Speed Control Switch 6V-90V 15A DC Motor Governor PWM Variable Speed Control Switch 6V-90V 15A
In Stock
SKU:007684Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
In Stock
SKU:007677- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V
In Stock
SKU:007673- Maximum Output Power: 2000W
- Maximum Output Current: 40A
- Power Supply: 9-50VDC
- High Quality ABS Case.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















