“DC 24V 7000RPM 38mm Diameter Permanent magnet Geared full copper industrial grade PMDC Brushed Motor” has been added to your cart. View cart
KK board 2.1.5 Multi-Rotor LCD Flight Control Board
In Stock
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
A2212 2450KV BLDC Motor for RC Drones and Quadcopters
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
F450/F550 Quadcopter High Landing Gear
In Stock
- Color: black
- Material: ABS Plastic
- The span of the bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit
In Stock
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
Standard 30A BLDC ESC Electronic Speed Controller with Connector
In Stock
- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 3A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
Simonk Red ESC 30A without Connector for Quadcopter
In Stock
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
In Stock
- Transmitter: FS-i6X (6 Channels)
- Receiver: FS-iA10B (10 Channels)
- RF Range: 2.408-2.475 GHz
- RF Power : < 20 dBm
- RF Channel: 135
- Bandwidth: 500 kHz
- Total Weight: 392 gm
- Power: 6V DC 1.5A
This product is available on backorder. Lead time will be 50 days.
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- Voltage Range: 100-120 V
This product is available on backorder. Lead time will be 50 days.
- 3-in-1: 3D printing, 10W laser, pen drawing
- Multi-material: Flexible, rigid, exotic filaments
- Precise laser: 0.3mm alignment, cuts up to 5mm
- Fast printing: Up to 600mm/s, 350°C hotend
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
This product is available on backorder. Lead time will be 50 days.
- Multi-material printing – Flexible, rigid, and exotic filaments.
- High-speed – Up to 600 mm/s with 350°C hotend.
- Large build volume – Max 350 × 320 × 325 mm³.
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module
- Ethernet & WPA2-Enterprise Wi-Fi
- Cloud-independent operation
- Chamber temp up to 60°C to reduce warping
- Carbon-fiber rods for rigidity & high-speed printing
- Auto failure detection & pause
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.