0
0 items
₹0.00
No products in the cart.
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 70W (max)
- PWM duty cycle: 1% -100%.
- PWM frequency:20khz
- Wide voltage DC motor speed controller.
- Operating Voltage Range: 3 ~ 9VDC
- No-load Current: 70 mA max
- Loaded Current: 200 mA max
- Operating Temperature: 50°C
- Rated Speed: 1000 RPM
- 3V to 9V DC Flat Small Size Toy Motor
- Operating Voltage: 12-24VDC
- No Load Current: 0.47A
- No-load Speed: 10000RPM
- Rated Torque: 364 g.cm
- Full Load Current: ≤2.5A
- Rated Current: ≤2.5A
- Rated Power: 28W
- Operating Voltage: 5-15VDC
- No Load Current: 0.2A
- No-load Speed: 4000RPM
- Rated Torque: 265 g.cm
- Full Load Current: ≤2A
- Rated Current: ≤2A
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
- Made in India 32-bit Arduino board with WiFi and Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- Built-in 12×8 programmable LED matrix for animations and games.
- Operating voltage: 5V, supports 6-24V input and USB-C.
- Advanced peripherals: DAC, CAN bus, 14-bit ADC.
- Made in India 32-bit Arduino board.
- Renesas R7FA4M1AB3CFM, 48 MHz Cortex®-M4 processor.
- 256 kB Flash, 32 kB SRAM, 8 kB EEPROM.
- Compatible with older Arduino UNO shields.
- Advanced peripherals: ADC, DAC, RTC, CAN bus.
- Supports 6-24 V input and USB-C® power.
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.