0
0 items
₹0.00
No products in the cart.
Sim800L GSM GPRS Module
In Stock
SKU:009710- This is Sim 800L GSM - GPRS Module
- Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
- Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
- Compact size and low current consumption, ideal for small projects
- Interfaces with any microcontroller for GSM functionality
- Enables making and receiving phone calls
- Supports sending and receiving SMS messages
- Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
- TTL serial interface with automatic baud rate detection
- Power-saving features with low current consumption, including sleep mode with as low as 1mA
Bambu Lab A1 Mini 3D Printer
In Stock
SKU:005941- Plug-N-Play Convenience
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High-Speed Precision
- Active Flow Rate Compensation
Soil Moisture Sensor Module
In Stock
SKU:005185- Operating voltage: 3.3V to 5V
- Dual output mode for accuracy
- Easy installation with bolt-hole
- Power (red) and digital output (green) indicators
- LM393 comparator chip for stability
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
TowerPro SG90 Mini Servo – 360 degree Rotation – Standard Quality
In Stock
SKU:005096- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll
In Stock
SKU:010405- Good toughness
- strong impact resistance
- High speed printing
- Smooth printed surface
- Easy to print
- Hard to break
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color
Out of stock
SKU:3D1001- High-quality PLA Basic 3D printing filament in vibrant orange color
- Diameter: 1.75mm, Weight: 1kg spool
- Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
- Easy to print, low odor, and minimal stringing
- Excellent molding quality with no warping
- Eco-friendly and cost-effective 3D printer filament for everyday use
4000W High-Power Thyristor Electronic Regulator
Out of stock
SKU:009003- Input Voltage: 220V AC.
- Maximum Power: 4000W.
- Adjustable Voltage: 0-220V AC.
- AC frequency: 50-60Hz.
4WD Suspension Smart Car Chassis with 125 RPM BO Motors Kit
In Stock
SKU:007331- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
MAX9814 High Performance Microphone AGC Amplifier Module CMA- 4544PF-W
In Stock
SKU:00705510W/15W/20W Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XYP15W
In Stock
SKU:007044L293D Motor Driver Module
In Stock
SKU:005692- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
DC Motor 3RPM 12Volts
In Stock
SKU:005670- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 3 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
5V Single Channel RELAY Module
In Stock
SKU:005581- ontrol Signal: Works with 5V TTL signals.
- Switching: Switches AC (up to 250V) and DC (up to 30V) loads.
- Relay Rating: Supports 5A at 240V AC.
- LED Indicator: Shows when the relay is ON.
- Wiring: 2×3-pin male header for easy connections.
DC 3-6 V Mini Micro Submersible Water Pump
In Stock
SKU:005104- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















