Filter

Showing 1–16 of 41 resultsSorted by popularity

Sort:
16×2 LCD Module (Green)

16×2 LCD Module (Green)

Original price was: ₹149.00.Current price is: ₹105.00.
In Stock
SKU:007000
  • Dimmable LED backlight with resistor or PWM
  • 16 characters, 2 rows
  • Controlled with 6 digital lines
  • Operates on 2.7V to 5.5V
  • LCD driver power: 3.0V to 11V
  • AC waveform liquid crystal drive
Add to cart
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹34,999.00.Current price is: ₹21,499.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Raspberry Pi 4 Model-B with 1 GB RAM

Raspberry Pi 4 Model-B with 1 GB RAM

Original price was: ₹5,799.00.Current price is: ₹4,850.00.
In Stock
SKU:005340
Add to cart
Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

₹83.00
In Stock
SKU:005147
  1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
  2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
  3. An IC pattern for adding DIP ICs up to 20 pins
  4. Power rails down the middle and sides
  5. A reset button and an extra general use button
Add to cart
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)

Original price was: ₹499.00.Current price is: ₹346.00.
In Stock
SKU:006798
  • Equips you with robust Wi-Fi and Bluetooth capabilities.
  • Can easily integrate into other products with 30-pin design.
  • Choose between AP, STA, or AP+STA modes.
  • The support for Lua programming simplifies development.
  • This board includes a CP2102 USB-UART bridge.
  • Powered by the ESP32S chip.
  • Offers scalable and adaptive features with adjustable clock frequencies.
  • Ideal for various applications.
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹400.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
Official Raspberry Pi 5 Model 8GB RAM

Official Raspberry Pi 5 Model 8GB RAM

Original price was: ₹19,999.00.Current price is: ₹14,950.00.
Out of stock
SKU:008124
  • 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU.
  • VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2.
  • Dual 4Kp60 HDMI display output.
  • 4Kp60 HEVC decoder.
  • Dual-band 802.11ac Wi-Fi.
  • Bluetooth 5.0 / Bluetooth Low Energy (BLE).
  • High-speed microSD card interface with SDR104 mode support.
  • 1 year manufacturer warranty against manufacturing defects.
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Add to cart
Raspberry Pi 5 Model 8GB

Raspberry Pi 5 Model 8GB

Original price was: ₹10,999.00.Current price is: ₹10,089.00.
Out of stock
SKU:005413
Read more
Official Arduino UNO Q Single Board Computer Model 2GB ABX00162

Official Arduino UNO Q Single Board Computer Model 2GB ABX00162

Original price was: ₹7,999.00.Current price is: ₹6,749.00.
In Stock
SKU:007273
  1. Hybrid single board computer with dual-brain architecture
  2. Combines Qualcomm® Dragonwing™ QRB2210 MPU and STM32U585 MCU
  3. Supports AI-powered vision and sound applications
  4. Fully compatible with Arduino UNO ecosystem and shields
  5. Develop using Arduino IDE, Arduino Cloud, or Python® on Linux® Debian
  6. Includes pre-built examples, AI models, and Qwiic connector for modules
Add to cart
L293D Motor Driver/Servo Shield for Arduino

L293D Motor Driver/Servo Shield for Arduino

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
SKU:007172
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
SKU:007116
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
MP3 Bluetooth 4.1 Decoder Board

MP3 Bluetooth 4.1 Decoder Board

Original price was: ₹149.00.Current price is: ₹102.00.
Out of stock
SKU:007102
  1. Operating Voltage: 3.7 – 5VDC
  2. SNR: 90dB
  3. Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Read more
Original JHD 20×4 character LCD Display with Blue Backlight

Original JHD 20×4 character LCD Display with Blue Backlight

Original price was: ₹649.00.Current price is: ₹477.00.
Out of stock
SKU:007092
  • This is Original JHD 20×4 character LCD Display with Blue Backlight
  • It is an original JHD LCD display with blue backlight and high quality.
  • The screen can be used for color, LCD, led light bar, and so on, it is easy to install and disassemble without special tools.
  • This module does not require a driver. The LCD screen will display both the character and data.
  • Black text on the Blue background
  • Single LED backlight included can be dimmed easily with a resistor or PWM.
  • Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Read more
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

Original price was: ₹149.00.Current price is: ₹118.00.
In Stock
SKU:007026
  • Module PCB size: 3.6cm * 2.3cm
  • PCF8591 operating voltage range of 2.5V to 6V
  • 4 analog inputs programmable as single-ended or differential inputs
  • VCC power supply interface external 3.3v-5v
  • 8-bit successive approximation A / D converter through an analog output DAC gain
Add to cart
Raspberry Pi USB Plug and Play Desktop Microphone

Raspberry Pi USB Plug and Play Desktop Microphone

Original price was: ₹349.00.Current price is: ₹177.00.
In Stock
SKU:006708
  1. USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
  2. Designed to filter out background noises for crisp, clear audio
  3. Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
  4. Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
  5. Flexible neck to adjust your convenient direction and Height for talking.
Add to cart

Filter Products

Categories

Filter by price

Product Status