Filter
Sort:
ZMPT101B AC Single Phase Voltage Sensor Transformer Module

ZMPT101B AC Single Phase Voltage Sensor Transformer Module

Original price was: ₹149.00.Current price is: ₹83.00.
In Stock
  1. Onboard precision miniature voltage transformer
  2. On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
  3. The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
  4. Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
Add to cart
P45 Small Float Level Control Switch Plastic Float Switch

P45 Small Float Level Control Switch Plastic Float Switch

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
  1. Contact Rating: 10 W.
  2. Switching Voltage: 220 V.
  3. Switching Current: 0.5 A.
  4. Breakdown Voltage: 220 VDC.
  5. Carry Current: 1 A.
  6. Contact Resistance: 100 mΩ.
Add to cart
GY-302 BH1750 Light Intensity Module

GY-302 BH1750 Light Intensity Module

Original price was: ₹149.00.Current price is: ₹82.00.
In Stock
  • No ambient light distinction
  • High precision determination accurate to 1 Lux for different lights
  • ROHM original package BH1750FVI chip
  • Operating Voltage: 3-5VDC
  • Built-in 16bit A/D converter
  • I2C interfac
Add to cart
Noel 25W 230V Sodering Iron Model-GOLD

Noel 25W 230V Sodering Iron Model-GOLD

Original price was: ₹249.00.Current price is: ₹162.00.
In Stock
  1. Brand: Noel
  2. Low current leakage
  3. Light Weight and Offers good grip
  4. General purpose for all electronic applications.
  5. Advanced Heating element
  6. High-Quality Nickel-Copper plated Bit
  7. Quickly attains the working temperature
  8. Constant Tip temperature
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
In Stock
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Add to cart
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
In Stock
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Add to cart
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

Original price was: ₹4,099.00.Current price is: ₹3,497.00.
In Stock
  • Smart AI vision camera solution for edge AI applications
  • Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
  • Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
  • Supports TensorFlow & PyTorch frameworks
  • Compatible with Arduino IDE for easy development
  • No-code model deployment and real-time inference visualization via SenseCraft AI
  • Comes in a custom 3D-printed enclosure
Add to cart
Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Original price was: ₹1,399.00.Current price is: ₹912.00.
In Stock
  • Compact and Arduino-compatible development board based on Raspberry Pi RP2040
  • Thumb-sized, surface-mount design for space-saving applications
  • Supports Arduino, MicroPython, and CircuitPython programming
  • Ideal for learning coding, electronics, and prototyping
  • Cost-effective solution with a wide range of compatible libraries
Add to cart
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Original price was: ₹1,499.00.Current price is: ₹1,097.00.
In Stock
  • Compact development board powered by Raspberry Pi RP2350
  • Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
  • Supports MicroPython, C, and C++ development
  • 19 multifunction GPIOs, RGB LED, and Battery Management System
  • Ultra-low power consumption (27μA) with battery power supply
  • Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Add to cart
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Original price was: ₹1,499.00.Current price is: ₹1,116.00.
In Stock
  • Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
  • Bluetooth 5.0
  • Wireless connect
  • Onboard 2 MB flash
  • Embedded machine learning projects
Add to cart
OE-775 Hall Effect Two Channel Magnetic Encoder

OE-775 Hall Effect Two Channel Magnetic Encoder

Original price was: ₹445.00.Current price is: ₹345.00.
In Stock
Add to cart
801S Vibration Shock Sensor Module

801S Vibration Shock Sensor Module

Original price was: ₹285.00.Current price is: ₹185.00.
In Stock
  • Has a signal output instruction
  • When the output valid signal is high, the light goes out
  • The sensitivity is adjustable (fine-tuning)
  • The wide detection range of vibration, no direction
  • With mounting holes, firmware installation is flexible and convenient.
Add to cart
3DPrintMill(CR 30) 3D Printer

3DPrintMill(CR 30) 3D Printer

₹83,999.00
In Stock
  • Print dimension 200 * 170 * ∞ mm
  • Print accuracy ± 0.1mm
  • Hotbed temperature ≤ 100 ℃
  • Nozzle temperature ≤ 240 ℃
  • Rated Power 350W
  • Supported filaments PLA / TPU / PETG
Add to cart
Creality Ender 3 V3 3D Printer

Creality Ender 3 V3 3D Printer

₹36,999.00
In Stock
  • CoreXZ for 600mm/s Printing Speed
  •  Stable Metal Build with Die-cast Parts
  •  Direct Extrusion on Full Power
  •  Integrated Tri-metal Nozzle, Quick to Swap
  •  Two Mighty Fans for Instant Cooling
  •  Auto Calibration for Leveling and More
Add to cart
Ender-3 V3 Plus 3D Printer

Ender-3 V3 Plus 3D Printer

₹51,999.00
In Stock
  • Printing Technology: FDM
  • Build Volume: 300*300*330mm
  • Product Dimensions: 410*445*577mm
  • Input Shaping: Yes (G-sensor included)
  • Connectivity: WiFi
  • Printing Speed: ≤600mm/s
Add to cart
Creality K2 Plus Combo 3D Printer

Creality K2 Plus Combo 3D Printer

₹163,999.00
In Stock
  • Model: Creality K2 Plus Combo 3D Printer
  • High-flow hotend (40mm³/s)
  • Auto-leveling for perfect first layer
  • CFS compatibility for multi-color printing
  • WiFi & USB connectivity
  • Dual AI cameras for smart monitoring
Add to cart

Filter Products

Categories

Filter by price

Product Status