Filter
Sort:
4 x AA Battery Back To Back Holder Case Box(Pack of 2)

4 x AA Battery Back To Back Holder Case Box(Pack of 2)

₹54.00
In Stock
Add to cart
L293D Motor Driver/Servo Shield for Arduino

L293D Motor Driver/Servo Shield for Arduino

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
  1. 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  2. 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
  3. Can run motors on 4.5VDC to 25VDC.
  4. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  5. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
Add to cart
3S 12V 25A 18650 Lithium Battery Protection Board

3S 12V 25A 18650 Lithium Battery Protection Board

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
  1. Operating current: 0 – 25A.
  2. Instantaneous current: 35 – 40A.
  3. Storage condition: -40 – +80℃.
  4. Quiescent current: less than 30uA.
  5. Balance current: about 40 – 50mA.
  6. Effective life: more than 30000 hours.
Add to cart
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit

3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit

Original price was: ₹199.00.Current price is: ₹135.00.
In Stock
  1. 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
  2. Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
  3. Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
  4. Continuous charge current (upper limit): 20A.
  5. Suitable for the drills with starting current below 80A, power 135W below.
Add to cart
Jetson Nano Development Board 4 GB 16 GB eMMC

Jetson Nano Development Board 4 GB 16 GB eMMC

Original price was: ₹24,999.00.Current price is: ₹20,497.00.
In Stock
  • Compact & Streamlined Design – Simplifies the carrier board with essential ports, making it easier to use and more cost-efficient.
  • Stable Performance with eMMC – Built-in 16GB eMMC memory ensures faster and more reliable read/write performance compared to TF card storage.
  • Flexible Boot Options – Supports both USB flash drive booting and TF card booting, giving users versatile setup choices.
  • Convenient Power Management – Direct DC power input without jumper caps, making the power supply connection simple and user-friendly.
  • Onboard Control Buttons – Integrated Power and Reset buttons allow quick system operation and troubleshooting.
  • Optimized Port Configuration – 1 × USB 3.0, 2 × USB 2.0, and 1 × CSI port provide necessary connectivity without excessive interfaces.
  • Form Factor Compatibility – Carrier board design aligns with the official Jetson Nano 2GB Developer Kit, ensuring smooth integration into existing setups.
  • Expandable Storage – Includes a TF card slot on the expansion board for additional storage flexibility.
  • Optional Core Module – Can be paired with or without the Jetson Nano 4GB module, depending on project needs.
  • Ideal for Practical Development – Suited for students, educators, engineers, and hobbyists who need a stable and simplified development platform.
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
Official Arduino Uno R3 SMD Microcontroller Board – A000073

Official Arduino Uno R3 SMD Microcontroller Board – A000073

Original price was: ₹2,499.00.Current price is: ₹1,837.00.
In Stock
  • Microcontroller board featuring an ATmega328P in an SMD package
  • Provides 14 digital input/output pins, with 6 capable of PWM output
  • Includes 6 analog input pins for reading sensor data
  • Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
  • Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
  • Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
  • The SMD Arduino Uno version of the popular Arduino Uno board
Add to cart
APM 2.8 Flight Controller with Built-in Compass

APM 2.8 Flight Controller with Built-in Compass

Original price was: ₹5,999.00.Current price is: ₹3,892.00.
In Stock
  1. Model: APM 2.8
  2. Input Voltage (V): 12-16 V.
  3. Processor: ATMEGA2560 and ATMEGA32U-2
  4. Dimensions (mm) LxWxH: 70 x 45 x 15
Add to cart
Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Arduino Uno R3 CH340G Development compatible Board with Micro USB port

Original price was: ₹349.00.Current price is: ₹217.00.
In Stock
  • This is the Uno R3 CH340G Development Board with Micro USB port compatible with Arduino
  • This UNO R3 board is based on ATmega328p microcontroller.
  • This board comes with a Micro USB port for powering the board.
  • This board has an operating voltage of 5V and features a 14 digital I/O pins.
  • The UNO board is integarted with 6 analog pins and 32Kb flash memory.
Add to cart
5S Lithium Battery Protection Board

5S Lithium Battery Protection Board

Original price was: ₹299.00.Current price is: ₹220.00.
In Stock
  1. Charging voltage: 21V
  2. Charging current: 56 A
  3. Continuous discharge current: 15 A
  4. Over current protection: 50/55/60 A
  5. Over current protection delay: 20/25/30 mS
  6. Single section power consumption since: 30uA
  7. Single section discharge detection voltage: 2.75-2.85V
  8. Over discharge recovery voltage: 2.90-3.20V
Add to cart
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire

Original price was: ₹149.00.Current price is: ₹118.00.
In Stock
  • Module PCB size: 3.6cm * 2.3cm
  • PCF8591 operating voltage range of 2.5V to 6V
  • 4 analog inputs programmable as single-ended or differential inputs
  • VCC power supply interface external 3.3v-5v
  • 8-bit successive approximation A / D converter through an analog output DAC gain
Add to cart
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade

PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade

Original price was: ₹1,149.00.Current price is: ₹1,048.00.
In Stock
  1. Brand: PANASONIC
  2. Model: NCR18650 B
  3. Rated voltage: 3.6-4.2 V
  4. Battery Capacity: 3350 mAh
  5. Charging time; Standard charge 4hours/100mA deadline
  6. Quick charge: 2hours/100mA deadline (25 °C)
  7. Dimension: As per the Standard 18650 Battery
Add to cart
Samsung INR18650-25R 2500Mah (8C) Li-Ion Battery

Samsung INR18650-25R 2500Mah (8C) Li-Ion Battery

Original price was: ₹549.00.Current price is: ₹467.00.
In Stock
  1. Brand: SAMSUNG
  2. Model: INR 18650 Lithium Battery
  3. Battery Capacity: 2500mAh
  4. Nominal Voltage: 3.7V
  5. Rechargeable: Yes
  6. Charging time; Standard charge 3hours/100mA deadline
  7. Quick charge: 1hours/100mA deadline (25 °C)
Add to cart
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear

ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear

Original price was: ₹7,999.00.Current price is: ₹7,873.00.
In Stock
 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
Add to cart
ZD850 Hexa-Rotor Frame for Drone

ZD850 Hexa-Rotor Frame for Drone

Original price was: ₹16,999.00.Current price is: ₹15,875.00.
In Stock
  1. This pure carbon fiber is ideal to withstand your drone standards.
  2. Ultra-Lightweight and Durable.
  3. Made by 100% 3K Twill super strong and lightweight carbon fiber.
  4. The frame has excellent strength.
  5. The arm has multiple motor mounting holes.
Add to cart
S550 Hexacopter Frame

S550 Hexacopter Frame

Original price was: ₹4,999.00.Current price is: ₹4,627.00.
In Stock
  1. Wheelbase: 550mm
  2. Weight: 550g/720g(without/with gimbal)
  3. Adopts S800 upward tilt arm design – Plastic injection moduling
  4. Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
  5. It comes with PCB center board of soldered
  6. The arm equips support ridges for better and faster forward flight.
  7. Features pre-threaded brass sleeves.
Add to cart

Filter Products

Categories

Filter by price

Product Status