Filter
Sort:
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

Original price was: ₹39.00.Current price is: ₹11.00.
In Stock
SKU:009844
  1. Input interface: Type C
  2. Current Protection: Yes
  3. Charging mode: Linear charging.
  4. Current: 1A adjustable.
  5. Charge precision: 1.5%.
  6. Input voltage: 4.5V-5.5V.
  7. Full charge voltage: 4.2V.
Add to cart
AC-DC Power Supply Module 24V 4A

AC-DC Power Supply Module 24V 4A

Original price was: ₹459.00.Current price is: ₹377.00.
In Stock
SKU:008461
  1. Input voltage: 85-265 V AC
  2. Output voltage: 24V DC
  3. Output current:4A
  4. Output power:80W
  5. Frequency:50HZ/60HZ
Add to cart
DS3231 RTC Module Precise Real Time Clock I2C AT24C32

DS3231 RTC Module Precise Real Time Clock I2C AT24C32

Original price was: ₹210.00.Current price is: ₹127.00.
In Stock
SKU:005254
  1. 1 Hz output pin SQW.
  2. 32 KHz output pin 32K.
  3. Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
  4. Time Format: HH: MM: SS (12/24 hr).
  5. Date Format: YY-MM-DD-dd.
Add to cart
10 Wire Male to Female Jumper Wires – 20cm

10 Wire Male to Female Jumper Wires – 20cm

Original price was: ₹29.00.Current price is: ₹8.00.
In Stock
SKU:007431
  1. 10P colored jumper wires
  2. Length: 200mm
  3. Weight: 10 gm
  4. Compatible with 2.54mm spacing pin headers
  5. High quality and in good working condition
  6. Durable and reusable
  7. Easy to install and use
Add to cart
ZMPT101B AC Single Phase Voltage Sensor Transformer Module

ZMPT101B AC Single Phase Voltage Sensor Transformer Module

Original price was: ₹149.00.Current price is: ₹83.00.
In Stock
SKU:006703
  1. Onboard precision miniature voltage transformer
  2. On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
  3. The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
  4. Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
Add to cart
OE-775 Hall Effect Two Channel Magnetic Encoder

OE-775 Hall Effect Two Channel Magnetic Encoder

Original price was: ₹445.00.Current price is: ₹345.00.
Out of stock
SKU:006390
Read more
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi

BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi

Original price was: ₹1,599.00.Current price is: ₹1,148.00.
Out of stock
SKU:009466
  • Integrates accelerometer, gyroscope, and magnetometer
  • Advanced sensor fusion algorithm for accurate 9-DOF orientation data
  • I2C Qwiic interface for easy plug-and-play integration
  • Operating voltage: 3.3V to 5.0V
  • Low power consumption for energy-efficient designs
  • Compact and easy to embed in robotics, drones, IoT, and AR/VR applications
  • Real-time measurement of acceleration, angular rate, and magnetic field strength
Read more
Solenoid Valve 230V 1/2 inch

Solenoid Valve 230V 1/2 inch

Original price was: ₹285.00.Current price is: ₹192.00.
In Stock
SKU:009387
  • Compact and convenient.
  • Easily installed and serviced
  • Precise and reliable.
  • The installation direction can be arbitrary Angle
  • Pressure-regulating valve (steady flow valve) function similar to the water flow switch
  • Not only can it provide a steady flow, but it also prevents the dry burning.
  • Suitable for fluids like water, oil, air.
Add to cart
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
BMP280 Sensor Module

BMP280 Sensor Module

Original price was: ₹54.00.Current price is: ₹27.00.
Out of stock
SKU:009507
  • Get more precise temperature, atmospheric pressure values, and approximate altitude data
  • Libraries and tutorials available for Arduino and other microcontrollers
  • Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
  • Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
  • Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
Read more
DFRobot Gravity Analog Water Pressure Sensor Module

DFRobot Gravity Analog Water Pressure Sensor Module

Original price was: ₹1,999.00.Current price is: ₹1,797.00.
Out of stock
SKU:009427
  • Measure water pressure accurately with this Arduino water sensor.
  • Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
  • Build smart water systems by combining with solenoid valves and other sensors.
  • Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
  • Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
  • Perfect for IoT water pressure monitoring projects and smart home control systems.
  • Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
Read more
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long

STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long

Original price was: ₹199.00.Current price is: ₹157.00.
Out of stock
SKU:007591
  1. Qwiic to 0.1″ header cable
  2. Supports I2C (SDA/SCL)
  3. Color-coded: 3.3V, GND, SDA, SCL
  4. Flexible, easy prototyping
Read more
3 Cell 18650 Lithium ion Battery Holder

3 Cell 18650 Lithium ion Battery Holder

₹35.00
In Stock
SKU:AB1001
Add to cart
eSUN PLA Transparent Glass light blue

eSUN PLA Transparent Glass light blue

Original price was: ₹1,499.00.Current price is: ₹1,399.00.
In Stock
SKU:010497
  1. Diameter : 1.75mm.
  2. Melting point: 210ºc.
  3. Color : Glass Light Blue
  4. Weight : 1 kg.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
Out of stock
SKU:010401
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more

Filter Products

Categories

Filter by price

Product Status