Filter
Sort:
ZMPT101B AC Single Phase Voltage Sensor Transformer Module

ZMPT101B AC Single Phase Voltage Sensor Transformer Module

Original price was: ₹149.00.Current price is: ₹83.00.
In Stock
SKU:006703
  1. Onboard precision miniature voltage transformer
  2. On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
  3. The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
  4. Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,597.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Soil Moisture Sensor Module

Soil Moisture Sensor Module

Original price was: ₹70.00.Current price is: ₹34.00.
In Stock
SKU:005185
  1. Operating voltage: 3.3V to 5V
  2. Dual output mode for accuracy
  3. Easy installation with bolt-hole
  4. Power (red) and digital output (green) indicators
  5. LM393 comparator chip for stability
Add to cart
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
DFRobot Gravity Analog Water Pressure Sensor Module

DFRobot Gravity Analog Water Pressure Sensor Module

Original price was: ₹1,999.00.Current price is: ₹1,797.00.
Out of stock
SKU:009427
  • Measure water pressure accurately with this Arduino water sensor.
  • Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
  • Build smart water systems by combining with solenoid valves and other sensors.
  • Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
  • Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
  • Perfect for IoT water pressure monitoring projects and smart home control systems.
  • Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
Read more
eSUN PLA Transparent Glass light blue

eSUN PLA Transparent Glass light blue

Original price was: ₹1,499.00.Current price is: ₹1,399.00.
In Stock
SKU:010497
  1. Diameter : 1.75mm.
  2. Melting point: 210ºc.
  3. Color : Glass Light Blue
  4. Weight : 1 kg.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
Out of stock
SKU:010401
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

Original price was: ₹1,699.00.Current price is: ₹1,299.00.
Out of stock
SKU:010285
  • High-speed 3D printer filament designed for fast and smooth prints
  • 1.75mm PLA basic filament with consistent diameter and strong layer adhesion
  • 1KG spool (2.2 lbs) in premium White color, perfect for professional and DIY use
  • Compatible with most FDM/FFF 3D printers
  • Low warping, minimal odor, and excellent surface finish
Read more
HMC5883L Triple Axis Compass

HMC5883L Triple Axis Compass

Original price was: ₹199.00.Current price is: ₹118.00.
In Stock
SKU:009446
  • This compact sensor fits into small projects such as UAVs and robot navigation systems.
  • The sensor converts any magnetic field to a differential voltage output on 3 axes.
  • This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
  • A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
Add to cart
W1209 Digital Temperature Controller Thermostat Module

W1209 Digital Temperature Controller Thermostat Module

Original price was: ₹124.00.Current price is: ₹86.00.
In Stock
SKU:009233
  • Get full control over your project with a massive temperature range, from a freezing -50°C all the way to 110°C.
  • No need to buy a separate sensor! A high-quality, waterproof temperature probe is already included in the package.
  • Setting it up is very simple; just use the simple '+' and '-' buttons, no coding knowledge needed at all.
  • Easily connect and control both your home AC appliances and 12V DC devices like fans, coolers, or pumps.
  • Fine-tune your system perfectly with advanced options for heating/cooling modes, timer delays, and safety alarms.
  • A proper device for students and DIY makers, perfect for building everything from egg incubators to automatic room coolers.
Add to cart
XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe

XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe

Original price was: ₹249.00.Current price is: ₹141.00.
In Stock
SKU:009208
  • The XH-W3001 digital thermostat switch needs a supply voltage of 12V and produces a power of 120W.
  • This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
  • All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
  • It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.
  • The 12V XH-W3001 temperature controller is best used for heating control in refrigeration and suitable for seafood machines.
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
SKU:007116
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
Out of stock
SKU:006560
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹437.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart

Filter Products

Categories

Filter by price

Product Status