Filter
Sort:
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

Original price was: ₹149.00.Current price is: ₹75.00.
In Stock
  1. Output Current: 1.5A (minimum), 2.2A (typ)
  2. Input and output voltage difference (VI-VO): 40Vdc (max)
  3. Adjustable output voltage range: 1.2 ~ 37V
  4. Operating temperature: -55 to +150
  5. Output Current: 1.5A
  6. Input voltage: 4.2 ~ 40 V
Add to cart
ZMPT101B AC Single Phase Voltage Sensor Transformer Module

ZMPT101B AC Single Phase Voltage Sensor Transformer Module

Original price was: ₹149.00.Current price is: ₹83.00.
In Stock
  1. Onboard precision miniature voltage transformer
  2. On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
  3. The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
  4. Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
Add to cart
220V AC 2000W SCR Voltage Regulator Motor Speed Controller

220V AC 2000W SCR Voltage Regulator Motor Speed Controller

Original price was: ₹149.00.Current price is: ₹76.00.
In Stock
SKU: AE1020
  1. This is 2000W 220V AC Motor Speed Controller Voltage Regulator
  2. This voltage regulator uses novel bi-directional high-power SCR.
  3. The input voltage of this voltage regulator can be between 110V ~ 220V AC
  4. The output voltage:50V-220V(Output voltage < = Input supply voltage)
  5. The maximum output power is 2000W and the maximum output current is 25A
  6. The size of this SCR is 1.85x1.38x1 inches
  7. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  8. This has High efficiency, high torque, low heat generating
Add to cart
SD Card Module

SD Card Module

Original price was: ₹59.00.Current price is: ₹37.00.
In Stock
  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
  • Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
  • MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
Add to cart
P45 Small Float Level Control Switch Plastic Float Switch

P45 Small Float Level Control Switch Plastic Float Switch

Original price was: ₹149.00.Current price is: ₹107.00.
In Stock
  1. Contact Rating: 10 W.
  2. Switching Voltage: 220 V.
  3. Switching Current: 0.5 A.
  4. Breakdown Voltage: 220 VDC.
  5. Carry Current: 1 A.
  6. Contact Resistance: 100 mΩ.
Add to cart
5V 16 Channel Relay Module

5V 16 Channel Relay Module

Original price was: ₹720.00.Current price is: ₹526.00.
In Stock
  • Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
  • Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
  • Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
  • Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
  • Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
  • Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
  • Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
Add to cart
12V 4CH Relay Board

12V 4CH Relay Board

Original price was: ₹245.00.Current price is: ₹143.00.
In Stock
  • Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
  • Electromagnetic relays are employed for the protection of various ac and dc equipment.
  • The over/under current and voltage protection of various ac and dc equipment.
Add to cart
2 CH 12V Relay Board

2 CH 12V Relay Board

Original price was: ₹99.00.Current price is: ₹74.00.
In Stock
  • The board is a 2 channel relay which works on 12V.
  • The input signal can come directly from a microcontroller.
  • Each relay can switch the variety of AC or DC high voltage.
  • Current loads working at 110V or 220V AC mains like lights, fans, motors and such
Add to cart
GY-302 BH1750 Light Intensity Module

GY-302 BH1750 Light Intensity Module

Original price was: ₹149.00.Current price is: ₹82.00.
In Stock
  • No ambient light distinction
  • High precision determination accurate to 1 Lux for different lights
  • ROHM original package BH1750FVI chip
  • Operating Voltage: 3-5VDC
  • Built-in 16bit A/D converter
  • I2C interfac
Add to cart
OE-775 Hall Effect Two Channel Magnetic Encoder

OE-775 Hall Effect Two Channel Magnetic Encoder

Original price was: ₹445.00.Current price is: ₹345.00.
In Stock
Add to cart
801S Vibration Shock Sensor Module

801S Vibration Shock Sensor Module

Original price was: ₹285.00.Current price is: ₹185.00.
In Stock
  • Has a signal output instruction
  • When the output valid signal is high, the light goes out
  • The sensitivity is adjustable (fine-tuning)
  • The wide detection range of vibration, no direction
  • With mounting holes, firmware installation is flexible and convenient.
Add to cart
3DPrintMill(CR 30) 3D Printer

3DPrintMill(CR 30) 3D Printer

₹83,999.00
In Stock
  • Print dimension 200 * 170 * ∞ mm
  • Print accuracy ± 0.1mm
  • Hotbed temperature ≤ 100 ℃
  • Nozzle temperature ≤ 240 ℃
  • Rated Power 350W
  • Supported filaments PLA / TPU / PETG
Add to cart
Creality Ender 3 V3 3D Printer

Creality Ender 3 V3 3D Printer

₹36,999.00
In Stock
  • CoreXZ for 600mm/s Printing Speed
  •  Stable Metal Build with Die-cast Parts
  •  Direct Extrusion on Full Power
  •  Integrated Tri-metal Nozzle, Quick to Swap
  •  Two Mighty Fans for Instant Cooling
  •  Auto Calibration for Leveling and More
Add to cart
Ender-3 V3 Plus 3D Printer

Ender-3 V3 Plus 3D Printer

₹51,999.00
In Stock
  • Printing Technology: FDM
  • Build Volume: 300*300*330mm
  • Product Dimensions: 410*445*577mm
  • Input Shaping: Yes (G-sensor included)
  • Connectivity: WiFi
  • Printing Speed: ≤600mm/s
Add to cart
Creality K2 Plus Combo 3D Printer

Creality K2 Plus Combo 3D Printer

₹163,999.00
In Stock
  • Model: Creality K2 Plus Combo 3D Printer
  • High-flow hotend (40mm³/s)
  • Auto-leveling for perfect first layer
  • CFS compatibility for multi-color printing
  • WiFi & USB connectivity
  • Dual AI cameras for smart monitoring
Add to cart
Creality HALOT R6 Resin 3D Printer

Creality HALOT R6 Resin 3D Printer

₹13,999.00
In Stock
  •  Easy to Use for Beginners
  •  Small Size, Robust Design
  • Quality Light Source and Z-axis
  • Light Uniformity＞90%
  • More Thoughtful Details：Anti-UV Lid | Anti-slip Bolts | Dual Vat Spouts |Tempered Glass Protector
Add to cart

Filter Products

Categories

Filter by price

Product Status