Filter
Sort:
KK board 2.1.5 Multi-Rotor LCD Flight Control Board

KK board 2.1.5 Multi-Rotor LCD Flight Control Board

₹4,045.00
In Stock
  • IC: Atmega644 PA
  • Gyro/Acc: 6050MPU
  • Input Voltage: 4.8V~6.0V
  • AVR Interface: Standard 6 Pin
  • Signal From Receiver: 1520us(5 channels)
  • Signal to ESC: 1520 us
Add to cart
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)

A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)

₹382.00
In Stock
  1. Model: A2212/6T
  2. Motor KV: 2200
  3. Max. Efficiency Current: 4-10A
  4. No Load Current: 0.5A @10V
  5. Current Capacity: 12A/60S
  6. LiPO Batteries: 2S-3S
Add to cart
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW

₹206.00
In Stock
  • Model: 720
  • Shaft Size: 1.0 mm
  • Rated Voltage: 3.7 V.
  • Current: 0.1 A.
  • Rated RPM: 48000.
  • Max Speed: 50000 RPM.
  • Wire Length: 5cm
Add to cart
A2212 2450KV BLDC Motor for RC Drones and Quadcopters

A2212 2450KV BLDC Motor for RC Drones and Quadcopters

₹369.00
In Stock
  • Model: A2212/6T
  • Motor KV: 2200
  • Max. Efficiency Current: 4-10A
  • No Load Current: 0.5A @10V
  • Current Capacity: 12A/60S
  • LiPO Batteries: 2S-3S
Add to cart
F450/F550 Quadcopter High Landing Gear

F450/F550 Quadcopter High Landing Gear

₹499.00
In Stock
  • Color: black
  • Material: ABS Plastic
  • The span of the bottom: 330mm
  • Height: 190mm
  • Compatibility: F450 and F550 Frames
  • Weight: 230
Add to cart
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit

F450 / Q450 Quadcopter Frame – PCB Version Frame Kit

₹733.00
In Stock
  1. Wheelbase: 450mm
  2. Material: Glass Fiber + Polyamide-Nylon
  3. Motor Mounting Hole Diameter: 3 mm
  4. Arm Size: 220 x 40 (LxW) mm
  5. Arm mounting holes (on frame): 3 mm
  6. Arm mounting holes (on arm): 2 mm
Add to cart
Standard 30A BLDC ESC Electronic Speed Controller with Connector

Standard 30A BLDC ESC Electronic Speed Controller with Connector

₹380.00
In Stock
  • Constant Current: 30A (Max 40A<10s).
  • BEC: 5V 3A.
  • Input Voltage: 11.1 ~ 11.7 V.
  • Li-Po battery: 2S ~ 3S.
  • Ni-MH 4-10 CELLS Auto Detect.
Add to cart
Simonk Red ESC 30A without Connector for Quadcopter

Simonk Red ESC 30A without Connector for Quadcopter

₹360.00
In Stock
  1. Model: SIMONK 30A.
  2. Constant Current: 30A (Max 40A < 10 sec).
  3. BEC: 5V 2A.
  4. Suitable Batteries: 2-3S LiPo.
Add to cart
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)

₹402.00
In Stock
  1. Motor KV: 1000
  2. Current Capacity: 12A/ 60S
  3. LiPO Batteries: 2S-3S
  4. Max. Efficiency Current: 4-10A
  5. Shaft Diameter: 3.17 mm
Add to cart
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)

₹403.00
In Stock
  1. odel: A2212/10T
  2. Motor KV: 1400
  3. Max. Efficiency Current: 6-12A
  4. No Load Current: 0.7A @10V
  5. Current Capacity: 16A/60S
  6. LiPO Batteries: 2S-3S
Add to cart
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver

₹4,499.00
In Stock
  • Transmitter: FS-i6X (6 Channels)
  • Receiver: FS-iA10B (10 Channels)
  • RF Range: 2.408-2.475 GHz
  • RF Power : < 20 dBm
  • RF Channel: 135
  • Bandwidth: 500 kHz
  • Total Weight: 392 gm
  • Power: 6V DC 1.5A
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

₹399,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

₹259,999.00
In Stock

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

₹224,999.00
In Stock
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab X1E Combo 3D Printer

Bambu Lab X1E Combo 3D Printer

₹299,000.00
In Stock
  1. Ethernet & WPA2-Enterprise Wi-Fi
  2. Cloud-independent operation
  3. Chamber temp up to 60°C to reduce warping
  4. Carbon-fiber rods for rigidity & high-speed printing
  5. Auto failure detection & pause
Add to cart

Filter Products

Categories

Filter by price

Product Status