0
				  0 items
					
				
				₹0.00
No products in the cart.
	L293D Motor Driver/Servo Shield for Arduino
 In Stock
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
3S 12V 25A 18650 Lithium Battery Protection Board
 In Stock
- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
 In Stock
- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
Jetson Nano Development Board 4 GB 16 GB eMMC
 In Stock
- Compact & Streamlined Design – Simplifies the carrier board with essential ports, making it easier to use and more cost-efficient.
- Stable Performance with eMMC – Built-in 16GB eMMC memory ensures faster and more reliable read/write performance compared to TF card storage.
- Flexible Boot Options – Supports both USB flash drive booting and TF card booting, giving users versatile setup choices.
- Convenient Power Management – Direct DC power input without jumper caps, making the power supply connection simple and user-friendly.
- Onboard Control Buttons – Integrated Power and Reset buttons allow quick system operation and troubleshooting.
- Optimized Port Configuration – 1 × USB 3.0, 2 × USB 2.0, and 1 × CSI port provide necessary connectivity without excessive interfaces.
- Form Factor Compatibility – Carrier board design aligns with the official Jetson Nano 2GB Developer Kit, ensuring smooth integration into existing setups.
- Expandable Storage – Includes a TF card slot on the expansion board for additional storage flexibility.
- Optional Core Module – Can be paired with or without the Jetson Nano 4GB module, depending on project needs.
- Ideal for Practical Development – Suited for students, educators, engineers, and hobbyists who need a stable and simplified development platform.
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
 In Stock
- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
Official Arduino Uno R3 SMD Microcontroller Board – A000073
 In Stock
- Microcontroller board featuring an ATmega328P in an SMD package
- Provides 14 digital input/output pins, with 6 capable of PWM output
- Includes 6 analog input pins for reading sensor data
- Equipped with a 16 MHz ceramic resonator, USB connection, power jack, and ICSP header
- Uses the ATmega16U2 as a USB-to-Serial converter, an upgrade from previous 8U2 chips
- Features the Rev3 1.0 pinout with added SDA, SCL, and IOREF pins for enhanced shield compatibility
- The SMD Arduino Uno version of the popular Arduino Uno board
MT8870 DTMF Voice Decoding Module
 In Stock
- Versatile Compatibility: Works with various DTMF signals, ideal for modems, mobile radios, and more.
- User-Friendly Design: Onboard LEDs for clear signal state and adjustable timing for accurate decoding.
- Wide Applications: Integrates easily with Arduino boards (UNO, MEGA2560, DUE) for diverse projects.
- Central Office Quality: Delivers excellent performance with an internal amplifier for optimal signal reception.
- Convenient Input: Accepts both 3.5mm jack and voice input for seamless operation.
- Multi-Channel Output: 12 dedicated outputs for phone keys (0-9, *, #) and 4 additional outputs for software control.
Arduino Uno R3 CH340G Development compatible Board with Micro USB port
 In Stock
- This is the Uno R3 CH340G Development Board with Micro USB port compatible with Arduino
- This UNO R3 board is based on ATmega328p microcontroller.
- This board comes with a Micro USB port for powering the board.
- This board has an operating voltage of 5V and features a 14 digital I/O pins.
- The UNO board is integarted with 6 analog pins and 32Kb flash memory.
10W/15W/20W Stereo Bluetooth Power Amplifier Board 12V/24V High Power Digital Amplifier Module XYP15W
 In Stock
5S Lithium Battery Protection Board
 In Stock
- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
 In Stock
- Module PCB size: 3.6cm * 2.3cm
- PCF8591 operating voltage range of 2.5V to 6V
- 4 analog inputs programmable as single-ended or differential inputs
- VCC power supply interface external 3.3v-5v
- 8-bit successive approximation A / D converter through an analog output DAC gain
TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board
 In Stock
- Original TPA3116D2 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity 120W out at both Channel
DC12-24V TPA3116D2 2.1 Channel Digital Subwoofer Power Amplifier Board
 In Stock
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board
 In Stock
- Original TPA3110 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity Dual 30W output.
4A DC-DC Step-down Adjustable Constant Voltage Module
 In Stock
- 1. High-power LED driver.
- Input voltage Min- 7V
- Input voltage Max-40V
- Lithium battery(or lead accumulator) charge.
- Vehicle-mounted power supply.
- Low voltage system power supply.
- 6V, 12V, 14V, 24V battery charge.
- On-board laptop power supply.
- Regulated power supply.
- Low voltage power supply system

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.
 
													














