0
0 items
₹0.00
No products in the cart.
- Clear filters
- Development Boards
- Raspberry Pi Cameras and Display
- IoT & Wireless
- Power Supply, Batteries & Accessories
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
Quectel EC200U 4G/GSM Module with GPS/GNSS
In Stock
SKU:008249- Supply Voltage (Vbat): 3.7V – 4V
- USB-C: 3.7V – 5V
- Operating temperature: -35 °C to +75 °C
- Support nano SIM card
- Support CAT 1 FDD & TDD
- Support GPRS multi-slot class 12
- Baud rates up to 921600 bps
10 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Sim800L GSM GPRS Module
In Stock
SKU:009710- This is Sim 800L GSM - GPRS Module
- Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
- Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
- Compact size and low current consumption, ideal for small projects
- Interfaces with any microcontroller for GSM functionality
- Enables making and receiving phone calls
- Supports sending and receiving SMS messages
- Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
- TTL serial interface with automatic baud rate detection
- Power-saving features with low current consumption, including sleep mode with as low as 1mA
Raspberry Pi 4 Model-B with 1 GB RAM
In Stock
SKU:005340LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker
In Stock
SKU:005158- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)
In Stock
SKU:006798- Equips you with robust Wi-Fi and Bluetooth capabilities.
- Can easily integrate into other products with 30-pin design.
- Choose between AP, STA, or AP+STA modes.
- The support for Lua programming simplifies development.
- This board includes a CP2102 USB-UART bridge.
- Powered by the ESP32S chip.
- Offers scalable and adaptive features with adjustable clock frequencies.
- Ideal for various applications.
NRF24L01+PA+LNA
In Stock
SKU:006683- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
Raspberry Pi 5 Model B 2GB RAM
In Stock
SKU:005406- Made in India 32-bit Arduino board with WiFi and Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- Built-in 12×8 programmable LED matrix for animations and games.
- Operating voltage: 5V, supports 6-24V input and USB-C.
- Advanced peripherals: DAC, CAN bus, 14-bit ADC.
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
In Stock
SKU:004972- Operating Voltage: 5V
- MCU: ATMEGA 328P
- Input Voltage (recommended): 7-12V.
- Input Voltage (limit): 6-20V.
- Digital I/O Pins: 14
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
Official Raspberry Pi 5 4GB Starter Kit
Out of stock
SKU:008154- Raspberry Pi 5 Model 4GB, perfect for diverse projects.
- Perfect for programming, gaming, and home automation.
- Encourages skill development, suitable for all age ranges.
- Suitable for beginners, experts, and DIY enthusiasts.
- Ensure stable power delivery with the official white 27W USB-C PD Power Supply.
- Connect effortlessly with the official Micro-HDMI to Standard HDMI Cable for crisp visuals.
- The Raspberry Pi 5 Starter Kit is easy to use and maintain.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















