Filter
Sort:
Sim800L GSM GPRS Module

Sim800L GSM GPRS Module

Original price was: ₹299.00.Current price is: ₹212.00.
In Stock
SKU:009710
  • This is Sim 800L GSM - GPRS Module
  • Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
  • Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
  • Compact size and low current consumption, ideal for small projects
  • Interfaces with any microcontroller for GSM functionality
  • Enables making and receiving phone calls
  • Supports sending and receiving SMS messages
  • Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
  • TTL serial interface with automatic baud rate detection
  • Power-saving features with low current consumption, including sleep mode with as low as 1mA
Add to cart
Quectel EC200U 4G/GSM Module with GPS/GNSS

Quectel EC200U 4G/GSM Module with GPS/GNSS

Original price was: ₹2,699.00.Current price is: ₹2,417.00.
In Stock
SKU:008249
  1. Supply Voltage (Vbat): 3.7V – 4V
  2. USB-C: 3.7V – 5V
  3. Operating temperature: -35 °C to +75 °C
  4. Support nano SIM card
  5. Support CAT 1 FDD & TDD
  6. Support GPRS multi-slot class 12
  7. Baud rates up to 921600 bps
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

Original price was: ₹299.00.Current price is: ₹185.00.
In Stock
SKU:007186
  1. Use BRT (Bias Resistor Transistor)
  2. Easier into flash mode.
  3.  30% increase in radiating area
  4. Good stability.

Add to cart
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

Original price was: ₹599.00.Current price is: ₹362.00.
In Stock
SKU:005158
  1. Manufacturer: Ai-Thinker
  2. LoRa  Spread Spectrum modulation technology
  3. Constant RF power output at + 20dBm-100mW voltage change
  4. High sensitivity: down to -148dBm
  5. Half-duplex SPI communication
  6. Programmable bit rates up to 300kbps
  7. Supports FSK, GFSK, MSK, GMSK, LoRa  and OOK modulation modes
Add to cart
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
NRF24L01+PA+LNA

NRF24L01+PA+LNA

Original price was: ₹199.00.Current price is: ₹133.00.
In Stock
SKU:006683
  • This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
  • Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
  • Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
  • Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
  • Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
  • Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
  • Low cost and software programming is fully compatible with NRF24L01 modules.
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹437.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
eSUN PLA Transparent Glass light blue

eSUN PLA Transparent Glass light blue

Original price was: ₹1,499.00.Current price is: ₹1,399.00.
In Stock
SKU:010497
  1. Diameter : 1.75mm.
  2. Melting point: 210ºc.
  3. Color : Glass Light Blue
  4. Weight : 1 kg.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent orange grey- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent orange grey- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010447
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
Out of stock
SKU:010401
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSun PLA+ 1kg 3D Printing Filament 1.75mm Milky White Color

eSun PLA+ 1kg 3D Printing Filament 1.75mm Milky White Color

Original price was: ₹1,699.00.Current price is: ₹1,299.00.
In Stock
SKU:010315

  • Premium eSUN PLA+ 3D printer filament in Milky White color

  • 1.75mm diameter, 1kg roll with eco-friendly paper spool

  • Enhanced toughness, durability, and superior impact resistance

  • Smooth surface finish with excellent layer adhesion and consistent feeding

  • Easy to print, FDA-approved, and made from biodegradable materials

  • Reduces warping and ensures high-speed, reliable performance
Add to cart
eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

Original price was: ₹1,699.00.Current price is: ₹1,299.00.
Out of stock
SKU:010285
  • High-speed 3D printer filament designed for fast and smooth prints
  • 1.75mm PLA basic filament with consistent diameter and strong layer adhesion
  • 1KG spool (2.2 lbs) in premium White color, perfect for professional and DIY use
  • Compatible with most FDM/FFF 3D printers
  • Low warping, minimal odor, and excellent surface finish
Read more
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg Cold White Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg Cold White Color

Original price was: ₹1,699.00.Current price is: ₹1,250.00.
In Stock
SKU:010105
  • High-speed 3d printer filament optimized for fast printing
  • Diameter: 1.75mm ± 0.03mm for smooth extrusion
  • Made from eco-friendly PLA basic material
  • Cold White color ideal for clean, sharp prints
  • 1kg (2.2 lbs) spool compatible with most FDM 3D printers
  • Excellent layer bonding and low warping
Add to cart
50CM IPEX 1 to RP-SMA Female Connector Cable 11mm

50CM IPEX 1 to RP-SMA Female Connector Cable 11mm

Original price was: ₹149.00.Current price is: ₹104.00.
Out of stock
SKU:008446
  1. IPEX 1 to RP-SMA Female
  2. Cable Length: 50 cm
  3. Cable Type: RG1.13
  4. Connector Length: 11mm
Read more

Filter Products

Categories

Filter by price

Product Status