Filter
Sort:
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C

Original price was: ₹39.00.Current price is: ₹11.00.
In Stock
SKU:009844
  1. Input interface: Type C
  2. Current Protection: Yes
  3. Charging mode: Linear charging.
  4. Current: 1A adjustable.
  5. Charge precision: 1.5%.
  6. Input voltage: 4.5V-5.5V.
  7. Full charge voltage: 4.2V.
Add to cart
Sim800L GSM GPRS Module

Sim800L GSM GPRS Module

Original price was: ₹299.00.Current price is: ₹212.00.
In Stock
SKU:009710
  • This is Sim 800L GSM - GPRS Module
  • Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
  • Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
  • Compact size and low current consumption, ideal for small projects
  • Interfaces with any microcontroller for GSM functionality
  • Enables making and receiving phone calls
  • Supports sending and receiving SMS messages
  • Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
  • TTL serial interface with automatic baud rate detection
  • Power-saving features with low current consumption, including sleep mode with as low as 1mA
Add to cart
AC-DC Power Supply Module 24V 4A

AC-DC Power Supply Module 24V 4A

Original price was: ₹459.00.Current price is: ₹377.00.
In Stock
SKU:008461
  1. Input voltage: 85-265 V AC
  2. Output voltage: 24V DC
  3. Output current:4A
  4. Output power:80W
  5. Frequency:50HZ/60HZ
Add to cart
Quectel EC200U 4G/GSM Module with GPS/GNSS

Quectel EC200U 4G/GSM Module with GPS/GNSS

Original price was: ₹2,699.00.Current price is: ₹2,417.00.
In Stock
SKU:008249
  1. Supply Voltage (Vbat): 3.7V – 4V
  2. USB-C: 3.7V – 5V
  3. Operating temperature: -35 °C to +75 °C
  4. Support nano SIM card
  5. Support CAT 1 FDD & TDD
  6. Support GPRS multi-slot class 12
  7. Baud rates up to 921600 bps
Add to cart
Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long

Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long

Original price was: ₹199.00.Current price is: ₹132.00.
Out of stock
SKU:007564
  • Red – 3.3VDC Power
  • Black – Ground
  • Blue – I2C SDA Data
  • Yellow – I2C SCL Clock
Read more
10 Wire Male to Female Jumper Wires – 20cm

10 Wire Male to Female Jumper Wires – 20cm

Original price was: ₹29.00.Current price is: ₹8.00.
In Stock
SKU:007431
  1. 10P colored jumper wires
  2. Length: 200mm
  3. Weight: 10 gm
  4. Compatible with 2.54mm spacing pin headers
  5. High quality and in good working condition
  6. Durable and reusable
  7. Easy to install and use
Add to cart
Adafruit STEMMA QT / Qwiic JST SH 4-pin Cable – 100mm Long

Adafruit STEMMA QT / Qwiic JST SH 4-pin Cable – 100mm Long

Original price was: ₹179.00.Current price is: ₹142.00.
Out of stock
SKU:007558
  1. Connector Type: JST SH 4-pin Cable
  2. Cable Length (cm): 10
Read more
Bambu Lab AMS lite – Automatic Material System

Bambu Lab AMS lite – Automatic Material System

Original price was: ₹32,499.00.Current price is: ₹24,600.00.
In Stock
SKU:005936
  • Multi-Color/Multi-Material Capability
  • Automatic Filament Backup
  • Improved Spool Compatibility
  • Easy to Maintain
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266

Original price was: ₹299.00.Current price is: ₹185.00.
In Stock
SKU:007186
  1. Use BRT (Bias Resistor Transistor)
  2. Easier into flash mode.
  3.  30% increase in radiating area
  4. Good stability.

Add to cart
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Raspberry Pi 4 Model-B with 1 GB RAM

Raspberry Pi 4 Model-B with 1 GB RAM

Original price was: ₹5,799.00.Current price is: ₹4,850.00.
In Stock
SKU:005340
Add to cart
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

Original price was: ₹599.00.Current price is: ₹362.00.
In Stock
SKU:005158
  1. Manufacturer: Ai-Thinker
  2. LoRa  Spread Spectrum modulation technology
  3. Constant RF power output at + 20dBm-100mW voltage change
  4. High sensitivity: down to -148dBm
  5. Half-duplex SPI communication
  6. Programmable bit rates up to 300kbps
  7. Supports FSK, GFSK, MSK, GMSK, LoRa  and OOK modulation modes
Add to cart
Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

Uno Prototype Shield with Mini Breadboard SYB-170 Proto Shied

₹83.00
In Stock
SKU:005147
  1. It has a nice standard 0.1″x0.1″ prototyping grid with big pads
  2. Comes with Stacking headers and plain header, choose whichever you want when soldering together
  3. An IC pattern for adding DIP ICs up to 20 pins
  4. Power rails down the middle and sides
  5. A reset button and an extra general use button
Add to cart
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
Raspberry Pi USB2.0 Mini Microphone

Raspberry Pi USB2.0 Mini Microphone

Original price was: ₹399.00.Current price is: ₹247.00.
Out of stock
SKU:007998
  • Works without drivers: just plug it in to your Raspberry Pi / Windows PC for an instant microphone.
  • Omni directional noise-canceling mic picks up sound from longer distances.
  • It has ultra small size, lightweight, elegant shape, just leave it plugged in to your laptop / notebook and then be carried anywhere.
  • MSN, KTV, online chat, Yahoo, Skype, VOIP, video conferencing network, network recording, online games and QQ etc.
Read more

Filter Products

Categories

Filter by price

Product Status