0
0 items
₹0.00
No products in the cart.
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
16×2 LCD Module (Green)
In Stock
SKU:007000- Dimmable LED backlight with resistor or PWM
- 16 characters, 2 rows
- Controlled with 6 digital lines
- Operates on 2.7V to 5.5V
- LCD driver power: 3.0V to 11V
- AC waveform liquid crystal drive
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
DS3231 RTC Module Precise Real Time Clock I2C AT24C32
In Stock
SKU:005254- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
10 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
OE-775 Hall Effect Two Channel Magnetic Encoder
Out of stock
SKU:006390BNO055 9-DOF Absolute Orientation Sensor Breakout with I2C Qwiic – 7Semi
Out of stock
SKU:009466- Integrates accelerometer, gyroscope, and magnetometer
- Advanced sensor fusion algorithm for accurate 9-DOF orientation data
- I2C Qwiic interface for easy plug-and-play integration
- Operating voltage: 3.3V to 5.0V
- Low power consumption for energy-efficient designs
- Compact and easy to embed in robotics, drones, IoT, and AR/VR applications
- Real-time measurement of acceleration, angular rate, and magnetic field strength
Solenoid Valve 230V 1/2 inch
In Stock
SKU:009387- Compact and convenient.
- Easily installed and serviced
- Precise and reliable.
- The installation direction can be arbitrary Angle
- Pressure-regulating valve (steady flow valve) function similar to the water flow switch
- Not only can it provide a steady flow, but it also prevents the dry burning.
- Suitable for fluids like water, oil, air.
Raspberry Pi 4 Model-B with 1 GB RAM
In Stock
SKU:005340- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
BMP280 Sensor Module
Out of stock
SKU:009507- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Libraries and tutorials available for Arduino and other microcontrollers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m
DFRobot Gravity Analog Water Pressure Sensor Module
Out of stock
SKU:009427- Measure water pressure accurately with this Arduino water sensor.
- Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
- Build smart water systems by combining with solenoid valves and other sensors.
- Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
- Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
- Perfect for IoT water pressure monitoring projects and smart home control systems.
- Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
ESP32 Node MCU Development Board with Wifi and Bluetooth (CP2102 Driver, 30 PIN)
In Stock
SKU:006798- Equips you with robust Wi-Fi and Bluetooth capabilities.
- Can easily integrate into other products with 30-pin design.
- Choose between AP, STA, or AP+STA modes.
- The support for Lua programming simplifies development.
- This board includes a CP2102 USB-UART bridge.
- Powered by the ESP32S chip.
- Offers scalable and adaptive features with adjustable clock frequencies.
- Ideal for various applications.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















