“20A Brushed Electronic Speed Controller” has been added to your cart. View cart
S500 HMF S550 Replacement Frame Arm(Black)
In Stock
- Material: Polyamide Nylon
- Weight: 50 gm
- Size: 233 ×40 (LxW) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatible Frame: S500 & S550
High Landing Gear For SK480 F450 F550 Quadrocopter
In Stock
- Color: black
- Material: ABS Plastic
- The span of the bottom: 330mm
- Height: 190mm
- Compatibility: F450 and F550 Frames
- Weight: 230
F450 4 Axis Quadcopter Frame Kit
In Stock
Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Motor Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
Add to cart
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
In Stock
Material: glass fiber
Compatible with MK KK flight control installment pitch of holes
Compatible with MK KK flight control system
Can connect 1-16 ESC.
Board Dimensions : 50 x 50 x 2 mm.
Weight: 8 gm.
Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
Add to cart
S500 Carbon Fiber Quadcopter Drone Frame Kit
In Stock
- High-Quality Carbon fiber Material Frame
- Comes With Landing Gear
- Power Distribution Board Pre Installed
- Easy to Assemble kit
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
In Stock
- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
ZMR 250 / QAV250 Quadcopter Frame
In Stock
- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
F450 F550 Replacement Frame Arm(Black)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
- Color : Black
F450 F550 Replacement Frame Arm (White)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
F450 F550 Replacement Frame Arm (Red)
In Stock
- Material: Polyamide Nylon+ Glass Fiber
- Weight: 50 gm
- Size: 220×40 (L x W) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatibility: F450/F550 & Q450/Q550
PAM 8403 Amplifier Module with Knob
In Stock
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage.
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
In Stock
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion
In Stock
- nput Voltage: 12V
- Connector: 5.5mm DC Jack
- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
KK board 2.1.5 Multi-Rotor LCD Flight Control Board
In Stock
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
In Stock
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.