We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
Filter

Showing 129–142 of 142 resultsSorted by popularity

Sort:
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A

1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A

Original price was: ₹999.00.Current price is: ₹787.00.
Out of stock
SKU:006731
  1. Input voltage :10-60V
  2. Output voltage: 12-83V (adjustable)
  3. Output Current: 12A
  4. Input Current: 20A
  5. The non-isolated step-up power conversion module
  6. Onboard LED illuminates when the voltage is applied to the module
  7. Equips Multi-turn Potentiometer.
Read more
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

Original price was: ₹149.00.Current price is: ₹75.00.
Out of stock
SKU:006712
  1. Output Current: 1.5A (minimum), 2.2A (typ)
  2. Input and output voltage difference (VI-VO): 40Vdc (max)
  3. Adjustable output voltage range: 1.2 ~ 37V
  4. Operating temperature: -55 to +150
  5. Output Current: 1.5A
  6. Input voltage: 4.2 ~ 40 V
Read more
SD Card Module

SD Card Module

Original price was: ₹59.00.Current price is: ₹37.00.
Out of stock
SKU:006673
  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
  • Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
  • MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
Read more
5V 16 Channel Relay Module

5V 16 Channel Relay Module

Original price was: ₹720.00.Current price is: ₹526.00.
Out of stock
SKU:006656
  • Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
  • Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
  • Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
  • Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
  • Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
  • Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
  • Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
Read more
2 CH 12V Relay Board

2 CH 12V Relay Board

Original price was: ₹99.00.Current price is: ₹74.00.
In Stock
SKU:006646
  • The board is a 2 channel relay which works on 12V.
  • The input signal can come directly from a microcontroller.
  • Each relay can switch the variety of AC or DC high voltage.
  • Current loads working at 110V or 220V AC mains like lights, fans, motors and such
Read more
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi

Original price was: ₹69.00.Current price is: ₹40.00.
In Stock
SKU:005585
  1. Voltage: 3.3 – 5V.
  2. Ports: Digital Level.
  3. Output load voltage: 0-24 V.
  4. Output load current: <5A (1A above need to add heat sink).
  5. Platform: Arduino, MCU, ARM, raspberry pi.
Read more
7Semi Mini ATmega328P Board – 5V

7Semi Mini ATmega328P Board – 5V

Original price was: ₹299.00.Current price is: ₹243.00.
In Stock
SKU:005016
  1. Microcontroller: ATmega328
  2. Circuit Operating Voltage: 5V
  3. Clock frequency: 16MHz.
  4. Digital I/O Pins: 14
  5. 8 analog input port: A0 ~ A7.
  6. A pair of TTL level serial port transceiver : RX / TX.
  7. 6 PWM port: D3, D5, D6, D9, D10, D11.
  8. Support serial download.
Read more
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega

Original price was: ₹1,999.00.Current price is: ₹1,212.00.
In Stock
SKU:005009
Read more
Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)

Original price was: ₹249.00.Current price is: ₹192.00.
In Stock
SKU:005003
  1. Operating Voltage (logic level): 5V
  2. 8 analog inputs ports: A0 ~ A7
  3. 14 Digital input / output ports: TX, RX, D2 ~ D13
  4. 1 pair of TTL level serial transceiver ports RX / TX
  5. Using Atmel Atmega328P-AU MCU
  6. There is a bootloader installed in it
  7. Standard 0.1” spacing DIP (breadboard friendly).
  8. Manual reset switch.
Read more
UNO Based ESP8266 Nodemcu Development Board

UNO Based ESP8266 Nodemcu Development Board

Original price was: ₹299.00.Current price is: ₹258.00.
In Stock
SKU:004996
  1. Based on ESP-8266EX.
  2. Arduino compatible, using Arduino IDE to program.
  3. Support OTA wireless upload.
  4. Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
  5. The direct use of Arduino IDE development, the same operation with Arduino UNO.
  6. Operating Voltage: 3.3V
  7. Digital I/O Pins: 11
  8. Analog Input Pins: 1
Read more
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Arduino MEGA R3 ATmega2560-16AU Development Compatible Board

Original price was: ₹1,459.00.Current price is: ₹1,334.00.
In Stock
SKU:004985
  1. Microcontroller: ATmega2560
  2. Operating Voltage: 5V
  3. Input Voltage (recommended): 7-12V
  4. Input Voltage (limits): 6-20V
  5. Digital I/O Pins: 54 (of which 15 provide PWM output)
  6. Analog Input Pins: 16
  7. DC Current per I/O Pin: 40 mA
  8. DC Current for 3.3V Pin: 50 mA
Read more
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board

Original price was: ₹1,549.00.Current price is: ₹1,197.00.
In Stock
SKU:004981
  1. Microcontroller CH340
  2. Operating Voltage 5V
  3. Input Voltage (recommended) 7-12V
  4. Input Voltage (limits) 6-20V
  5. Digital I/O Pins 54 (of which 15 provide PWM output)
  6. Analog Input Pins 16
  7. DC Current per I/O Pin 40 mA
  8. Dimensions : 111 x 54 x 12 (LxWxH) mm.
Read more
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)

Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)

Original price was: ₹249.00.Current price is: ₹203.00.
In Stock
SKU:004968
  1. Operating Voltage (logic level): 5V
  2. With Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. There is a bootloader installed in it
  8. Standard 0.1” spacing DIP (breadboard friendly).
  9. Manual reset switch.
Read more
Arduino UNO R3 CH340G ATMega328P compatible with arduino + Cable

Arduino UNO R3 CH340G ATMega328P compatible with arduino + Cable

Original price was: ₹599.00.Current price is: ₹437.00.
In Stock
SKU:004960
Read more

Filter Products

Categories

Filter by price

Product Status