0
0 items
₹0.00
No products in the cart.
A2212 2450KV BLDC Motor for RC Drones and Quadcopters
In Stock
SKU:006079- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
F450/F550 Quadcopter High Landing Gear
Out of stock
SKU:006072F450 / Q450 Quadcopter Frame – PCB Version Frame Kit
In Stock
SKU:006067- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
Standard 30A BLDC ESC Electronic Speed Controller with Connector
In Stock
SKU:006063- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 3A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
Simonk Red ESC 30A without Connector for Quadcopter
In Stock
SKU:006059- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
SKU:006054- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006049- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
Multi Coin Acceptor Programable for Vending Machines
In Stock
SKU:005868MQ2 Smoke LPG Butane Gas Sensor Module
Out of stock
SKU:005282- Model: MQ-6
- Operating Voltage: 5V DC
- Detecting Range:200-10000 ppm
- Relative Humidity:<95% RH
IIC/I2C Serial Interface Adapter Module
In Stock
SKU:005276- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
M274 360 Degree Rotary Encoder
In Stock
SKU:005259- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
TCS3200 Colour Recognition Sensor Module
In Stock
SKU:005249- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
IR (Infrared) Obstacle Avoidance Sensor Module
In Stock
SKU:005201- Main Chip LM393
- Operating Voltage : 3.3 ~ 5 VDC
- Distance Measuring Range- 8 cm
- Dimensions 48 x 14 x 8 mm
- Weight-15 grams
MQ-3 Alcohol Detector Gas Sensor Module
In Stock
SKU:005200- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
DHT11 Module with LED (Temperature and Humidity sensor)
In Stock
SKU:005190- Input Supply voltage (VDC): 3.3 ~ 5
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees
- Temperature measurement error: ±2 degrees
- Humidity measurement range: 20%~95%RH
Soil Moisture Sensor Module
In Stock
SKU:005185- Operating voltage: 3.3V to 5V
- Dual output mode for accuracy
- Easy installation with bolt-hole
- Power (red) and digital output (green) indicators
- LM393 comparator chip for stability

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















