0
0 items
₹0.00
No products in the cart.
Mini 360 Step-Down Buck Converter Power Module
Out of stock
SKU:008933- Module: Non-isolated step-down module (BUCK)
- Input voltage: DC 4.75V-23V
- Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
- Rectification: Synchronous rectification
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no-load)
LM2596S with SMD LED DC-DC Step-Down Power Supply
Out of stock
SKU:008923- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
Mini MP1584 DC-DC 3A Adjustable Buck Module
Out of stock
SKU:008918- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing Resistor
Waveshare RS485 CAN HAT for Raspberry Pi
Out of stock
SKU:008908- Operating voltage: 3.3V
- CAN controller: MCP2515
- CAN transceiver: SN65HVD230
- 485 transceiver: SP3485
- Mounting hole size: 3.0mm
DS1302 Real Time Clock Module (with Battery)
Out of stock
SKU:008897- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
- Operating temperature: 0 degree — 70 degree
DS1302 RTC Real Time Clock Module with Battery
Out of stock
SKU:008895 The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
Read more
60A Intelligent LCD Solar, Controller
Out of stock
SKU:008888- Built-in Industrial Micro-Controller
- Big LCD Display
- All Adjustable Parameters
- Full 4 Stage PWM Charge Management
10A Intelligent LCD Solar Controller
Out of stock
SKU:008885- Built-in Industrial Micro-Controller
- Big LCD Display
- All Adjustable Parameters
- Full 4 Stage PWM Charge Management
RS232 to TTL SP3232 UART Transceiver Communication Serial Module
Out of stock
SKU:008873- IC Chip: SP3232E
- Operating Voltage: 3.0V – 5.5V
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- ESD enhanced
- Hardware flow control supported
Arduino PCF8574T I2C 8 Bit IO GPIO expander module
Out of stock
SKU:008868RS485 to TTL Serial Port Converter Adapter Communication Module
Out of stock
SKU:008862- Model Number: RS485 CAN
- Supply Voltage: 3.3-5v
- Operating Temperature: 40°-85°
- Type: Communication module
RS422 to TTL Power Supply Converter Board
Out of stock
SKU:008856- RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters
- The module has ESD 15KV protection.
- Onboard to increase the limit of 10 ohms current limiting current protection.
- Module with TVS diode. Anti lightning, peak voltage.
- The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
Out of stock
SKU:008851- USB Connector type: USB-Mini
- Chip Used: FT232RL
- Output Voltage 5v and 3.3v Indicator LEDs USB Connector
- Automatic detection of data transfer speeds up to 1Mbps
- Data exchange capability with an external interface with UART protocol
- Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
Out of stock
SKU:008846- Chipset: CP2102
- Power: USB, 3.3V (<40mA), 5V, GND, TX, RX
- Baud Rate: 300bps to 1Mbps.
- Signal Levels: 3.3V, positive logic.
- OS Support: Windows, Mac OS, Linux.
- Format Support: 5-8 data bits, 1/2 stop bits
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
In Stock
SKU:008720- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 12V relay ON; 0-2.5V relay OFF
24V 1 Channel Relay Module
In Stock
SKU:008711- Output SPDT Relay.
- Header connector for connecting power and trigger voltage.
- LED indicates relay status.
- Screw terminal connector for easy relay output connection.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














