0
0 items
₹0.00
No products in the cart.
D4184 Mosfet control Module Replacement Relay
Out of stock
SKU:008486- Model: D4184
- MOS tube: 40V 50A
- Dimensions: 23mm X 16mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
5V Dual Channel Relay Module with Optocoupler
Out of stock
SKU:008481- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
Waveshare WAVE ROVER Flexible And Expandable 4WD Mobile Robot Chassis, Full Metal Body
In Stock
SKU:007419- Chassis height: 33.70mm
- OLED screen: 0.91inch
- Tire width 42.50mm
- Running speed: 1.25m/s
- Tire diameter: 80mm
- Number of driving wheels: 4
Cligo Smart Robot Car Kit 2 WD for Kids
In Stock
SKU:007413Features:
- EasyMech’s branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
- Ages: 10+
EasyMech 100 mm HD Wheel Basic Shock Absorber Smart Car Robot Chassis
Out of stock
SKU:007406- EasyMech’s branded Product.
- Easy to assemble.
- Shock absorber chessis.
- Heavy-duty wheel Provides.
Cytron PikaBot – Maker UNO Smart Car Kit
In Stock
SKU:007400- Controller: Maker UNO
- No soldering needed, only requires to connect jumper wires
- Motor Driver: Maker Drive dual-channel DC brush motor driver
- Driven by two TT motor with pre-solder wires
- Power both controller and motor with 4 x AA battery, with battery holder too
- Comes with IR Line Sensor module, for line following
Intelligent Turtle Car Learning Suite Chassis
In Stock
SKU:007391DIY Nvidia JetsonNano Development Learning Kit (JetBot)
In Stock
SKU:007385- Powered by Jetson Nano Developer Kit V3, ideal for learning AI projects.
- Ready-to-assemble kit with no need for 3D printing or complex electronics setup.
- Interactive tutorials included for object tracking, collision avoidance, and more.
- Supports JetBot ROS & AWS RoboMaker, with AWS IoT Greengrass pre-installed.
M5STACK RoverC PRO (W/O M5StickC)
In Stock
SKU:007374- I2C Address 0x38
- LEGO compatible
- Equipped with 16340(700mAh) battery holder
- Control Chip: STM32F030C6T6
Cligo Wireless Remote Controlled Smart Car Chassis
In Stock
SKU:007370Poly Bluetooth Controlled Omni Wheel Robot Kit
In Stock
SKU:007364- 3 wheel drive
- Omni wheel
- Capable of rotation and sideways movements
- With Arduino microcontroller and IO expansion board
- Acrylic chassis
DIY 18DOF Aluminum Hexapod Spider Six 3DOF Legs Robot Kit with 32CH Controller
In Stock
SKU:007357Black 6WD Search Rescue Platform Smart Car Chassis Damping Off-Road Climbing WIFI Car
In Stock
SKU:007349- Operating voltage: 12V
- Maximum load: 6kg
- Rated Current: 350mA * 6
- Motor original speed: 17000 rpm
- Output shaft speed: 500 rpm
- Nominal torque: 5 kg / cm
Tank Robot Smart Car Chassis
In Stock
SKU:007344- Arduino Compatible
- Easy to assemble
- L9110 Connected and Included
- Operating Voltage: 3V – 12V
- Opto Coupler Speed Sensor is Included
- Chassis Kit, Belts, Motors Are Included
- Motor Operating Voltage: 3V – 8V
- Motor Maximum Torque: 1.5kg.cm at 7.2V
- Motor Speed Without Load: 250rpm/m at 7.2V
- Body Size (L x W x H) cm : 19 x 12.5 x 5
Metal Tank Robot Smart Car Chassis Kit (Black)
In Stock
SKU:007338- Very Easy to Assemble
- High-Quality Laser-cut Metal Chassis
- Precise Hole to assemble motors and Sensor
- High-Quality Wheels and 125 RPM BO Motors with Dual Straight Shaft
- Can be used for any electronics and Mechanical college project
Cligo Wireless Bluetooth Controlled Gripper Robot Car Kit For Kids
In Stock
SKU:007334- EasyMech’s branded Product.
- Easy to assemble, Snap-fit chassis
- Lightweight ABS Chassis.
- Hands-on experience of programming, electronics, and robotics
- No Remote Control required you can operate with your Mobile Phone
- Ages: 10+

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















