0
0 items
₹0.00
No products in the cart.
Male To Female Jumper Wires 40 Pcs 10cm
In Stock
SKU:007446- 40P color jumper wires
- Length: 100mm
- Weight: 25 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female 40PCS
In Stock
SKU:007443- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
10CM Female to Female Breadboard Jumper DuPont 2.54MM 1P-1P Cable 40 Pcs
In Stock
SKU:007437- 40P color DuPont line
- Length: 100mm
- Weight: 25 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Male Jumper Wires 40Pcs 20cm
In Stock
SKU:007434- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Female Jumper Wires 40Pcs 20cm
In Stock
SKU:007425- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model:Â NCR18650Â B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V ACÂ 100VÂ ~Â 240VÂ 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Add to cart
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester Rated 5.00 out of 5 based on 1customer rating
In Stock
SKU:006787- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
Bambu Lab H2D- Combo 2 40W 3D Printer
In Stock
SKU:006039This product is available on backorder. Lead time will be 50 days.
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- Voltage Range: 100-120 V
Bambu Lab H2D- Combo 1 3D Printer
In Stock
SKU:006016This product is available on backorder. Lead time will be 50 days.
- Multi-material printing – Flexible, rigid, and exotic filaments.
- High-speed – Up to 600 mm/s with 350°C hotend.
- Large build volume – Max 350 × 320 × 325 mm³.
- Dual-nozzle Multi-material 3D Printing
- 350*320*325 mm³ Print Volume
- 350°C Nozzle & 65°C Active Chamber Heating
- Optional 10W/40W Laser and Cutting Module

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















