0
0 items
₹0.00
No products in the cart.
Female to Female DuPont Line 40 Pin 30cm
In Stock
SKU:007450 Length: 300mm
Weight: 45 gm
Compatible with 2.54mm spacing pin headers
40pcs chromatic female to female color jump wire
High quality and in good working condition
Durable and reusable
Add to cart
Male To Female Jumper Wires 40 Pcs 10cm
In Stock
SKU:007446- 40P color jumper wires
- Length: 100mm
- Weight: 25 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Male Jumper Wires 40Pcs 20cm
In Stock
SKU:007434- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Female Jumper Wires 40Pcs 20cm
In Stock
SKU:007425- 40P colored jumper wires
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
In Stock
SKU:007155- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model: NCR18650 B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear
In Stock
SKU:006878 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
ZD850 Hexa-Rotor Frame for Drone
In Stock
SKU:006869- This pure carbon fiber is ideal to withstand your drone standards.
- Ultra-Lightweight and Durable.
- Made by 100% 3K Twill super strong and lightweight carbon fiber.
- The frame has excellent strength.
- The arm has multiple motor mounting holes.
S550 Hexacopter Frame
In Stock
SKU:006858-
Wheelbase: 550mm
-
Weight: 550g/720g(without/with gimbal)
-
Adopts S800 upward tilt arm design – Plastic injection moduling
-
Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
-
It comes with PCB center board of soldered
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V AC 100V ~ 240V 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Add to cart
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















