0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
In Stock
SKU:007026- Module PCB size: 3.6cm * 2.3cm
- PCF8591 operating voltage range of 2.5V to 6V
- 4 analog inputs programmable as single-ended or differential inputs
- VCC power supply interface external 3.3v-5v
- 8-bit successive approximation A / D converter through an analog output DAC gain
HC-05 Bluetooth Module
In Stock
SKU:006984- Provide seamless wireless communication in various applications like GPS navigation systems, water meter readings, and electricity gas meter readings.
- This Bluetooth module allows you to easily switch between Master and Slave modes using AT Commands.
- Connect effortlessly with a wide range of devices such as Arduino, phones, laptops, and microcontrollers for a competitive price.
- The module uses USART for communication, making it compatible with microcontrollers supporting USART.
- You can easily configure the module's settings using the command mode, giving you control over your wireless connections.
- Perfect for connecting computers, mobile phones, and microcontrollers for data exchange and DIY, IoT, and Robotics Projects
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model: NCR18650 B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
FlySky FS-IA6B RF 2.4GHz 6CH PPM Output with iBus Port Receiver
In Stock
SKU:006892- High reliability, interference free 2.4GHz AFHDS2A signal operation.
- Transmitting Power of this reciever is ≤ 20 dBm.
- Easy to bind and very fast link-up.
- 6 channel receiver compatible i4 i6 i10 transmitter.
- Quick and extremely stable in performance.
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear
In Stock
SKU:006878 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
ZD850 Hexa-Rotor Frame for Drone
In Stock
SKU:006869- This pure carbon fiber is ideal to withstand your drone standards.
- Ultra-Lightweight and Durable.
- Made by 100% 3K Twill super strong and lightweight carbon fiber.
- The frame has excellent strength.
- The arm has multiple motor mounting holes.
S550 Hexacopter Frame
In Stock
SKU:006858-
Wheelbase: 550mm
-
Weight: 550g/720g(without/with gimbal)
-
Adopts S800 upward tilt arm design – Plastic injection moduling
-
Ensures hardness and lighter weight – Brushless gimbal compatible for FPV
-
It comes with PCB center board of soldered
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
RS555 6000RPM 12V Dc Motor
In Stock
SKU:006849D Shaft 775 12V 12000 RPM/MIN High Speed High Torque DC Motor Dual Shaft
In Stock
SKU:006841 Voltage: 12V DC.
Speed: 12000 RPM for high-speed performance.
Applications: Ideal for robotics, automation, DIY projects, power tools, hobbyist projects, and educational demonstrations.
Reliable Performance.
Versatility: Perfect for projects demanding both speed and torque.
Read more
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V AC 100V ~ 240V 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Read more
TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality
In Stock
SKU:006826- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 10 kg-cm
- Stall torque @6.6V : 12 kg-cm
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
In Stock
SKU:006819- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















