0
0 items
₹0.00
No products in the cart.
SIM808 Module GSM GPRS GPS Development Board
In Stock
SKU:008292- GPS Antenna for Support 2G SIM Card
- Charging: Supports charging control for Li-Ion battery
- Frequency bands: SIM808 Quad-band: GSM 850, EGSM 900, DCS 1800, PCS 1900. SIM808 can search the 4 frequency bands automatically. The frequency bands also can be set by AT command “AT+CBAND”
- Normal operation: -40℃ ~ +85℃
- Storage temperature -45℃~ +90℃
USB to GSM Serial GPRS SIM800C Module
In Stock
SKU:008287- Bluetooth Computer Control Calling with Glue Stick Antenna
- Working Humidity range: 0%-95%RH
- Working Temperature range: – 20℃~85℃
- Connectivity Support: 2G/3G/4G
- Bluetooth standard: IEEE802.15
- Working frequency: 2.4 GHz
- Chip: CH340G
GSM GPRS SIM808 Module SMS Chip Development Board
In Stock
SKU:008280- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- GPRS mobile station class B
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Supports charging control for Li-Ion battery
- Supports Real-Time Clock
- Integrated GPS/CNSS and supports A-GPS
- Low power consumption, 10mA in sleep mode
1.5M GPS Antenna with SMA Male Connector
In Stock
SKU:008275- Frequency: 1575 to 1602mhz (L1 Band)
- Connector Type: SMA Male
- Length: 1.5 meters
- Impedance: Typically 50 ohms
SIM800C Module SMS Data Replaces SIM900A
In Stock
SKU:008269- Development Board Glue Stick Antenna
- Quad-Band 850/900/1800/1900 MHz
- Class 4 (2 W @ 850/900 MHz)
- Class 1 (1 W @ 1800/1900 MHz)
- FM: 76 ~ 109 MHz bands in all world (50 KHz step)
- Sensitivity: <-105dB
- SIM supports 2G, 3G, 4G
Quectel EC200U 4G/GSM Module without GPS
In Stock
SKU:008265- Network Compatibility: LTE-FDD/LTE-TDD/WCDMA/GSM networks
- Data Transmission: Enables high-speed data transmission with LTE Cat 1 capabilities
- Form factor: LCC
- USB-C: 3.7V – 5V
- LTE Features: Support CAT 1 FDD & TDD Max 10 Mbps (DL) | Max 5 Mbps (UL)
- SIM Interface: Support nano SIM card
SIM800C GSM GPRS Module 5V/3.3V TTL Development Board
In Stock
SKU:008260- IPEX with Bluetooth for STM32 C51
- Unwelded
- Package: SMD
-
Model number: SIM800C
-
Operating Voltage: 3.3v, 5v
-
Logic Type: TTL
-
Antenna Interfacing type: IPEX Antenna
LILYGO T-Call V1.4 ESP32 Wireless Module SIM800L
In Stock
SKU:008254- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
Sim800C GPRS/GSM Shield with Antenna
In Stock
SKU:008241- Quad-Band 850/ 900/ 1800/ 1900 MHz
- GPRS multi-slot class 10/12
- GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Onboard Provision for Mic and Speaker.
SIM808 Bluetooth Compatible GSM/GPRS/GPS Module
In Stock
SKU:008235- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
Arduino IOT Bundle
Out of stock
SKU:008223- The Raspberry Pi 4B is integrated with a Broadcom 2711, Quad-Core Cortex A72 64-bit processor that operates at 1.5HZ and comes with an 8GB RAM.
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE.
- This Kit is best suitable for learning the basics of programming, coding and electronics, including current, voltage and digital logic
- No prior knowledge or experience is necessary as the kit guides you through step by step
- The Arduino Student kit ideal to use for remote teaching, homeschooling, and for self-learning
- The kit can also be integrated into different subjects such as physics, chemistry, and even history
Arduino MKR IoT Carrier Rev2 – ABX00073
Out of stock
SKU:008216- APDS-9960 sensor for light, proximity, color, and gestures.
- 5 capacitive touch buttons.
- Buzzer and 5 RGB LEDs.
- 2 relays for 24V devices.
- Environment monitoring capabilities.
- Customizable IoT interfaces.
- Grove connectors for additional sensors.
- Micro SD card slot for data storage.
Original Arduino Nano 33 IOT – ABX00027
Out of stock
SKU:008213- Equipped with a powerful SAMD21 Cortex-M0+ 32-bit low-power ARM MCU.
- Integrated u-blox NINA-W102 module for seamless WiFi and Bluetooth connectivity.
- Features ATECC608A for secure data encryption and communication.
- Includes an LSM6DS3 6-axis sensor, perfect for motion and orientation detection.
- Operates at a rapid 48MHz for efficient performance.
- Functions at a standard 3.3V, compatible with most electronics projects.
Original Arduino Nano Every – ABX00028
Out of stock
SKU:008208- Powered by ATMega4809 for enhanced performance.
- Operates at 20MHz for smooth and efficient processing.
- Offers 48KB for code and program storage.
- Equipped with 256 bytes of EEPROM for reliable data storage.
- Provides 6KB for dynamic data handling and flexibility.
Arduino Micro with Headers A000053
In Stock
SKU:008203- The Arduino Micro board is built with an ATmega32U4 microcontroller.
- This Arduino Micro features 20 digital input/output pin and a 16 MHz crystal oscillator.
- Simply connect it to a computer with a micro USB cable to get started.
Arduino Nano 33 IOT Headers ABX00032
In Stock
SKU:008196- The Arduino Nano 33 IoT is based on the SAMD21 microcontroller.
- The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range.
- The Arduino Nano has an operating voltage of 3.3V.
- It is integrated with 14 digital input-output pins, 11 PWM pins, a UART, an SPI and an I2C interface.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














