0
0 items
₹0.00
No products in the cart.
A2212 6T 2200KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006088- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
SKU:006083- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
A2212 2450KV BLDC Motor for RC Drones and Quadcopters
In Stock
SKU:006079- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
F450/F550 Quadcopter High Landing Gear
Out of stock
SKU:006072F450 / Q450 Quadcopter Frame – PCB Version Frame Kit
In Stock
SKU:006067- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
Standard 30A BLDC ESC Electronic Speed Controller with Connector
In Stock
SKU:006063- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 3A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
Simonk Red ESC 30A without Connector for Quadcopter
In Stock
SKU:006059- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
In Stock
SKU:006054- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
In Stock
SKU:006049- odel: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
7Semi Mini ATmega328P Board – 5V
In Stock
SKU:005016- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
In Stock
SKU:005009Nano R3 W/O USB Cable Compatible with Arduino (Un Soldered)
In Stock
SKU:005003- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
UNO Based ESP8266 Nodemcu Development Board
In Stock
SKU:004996- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Arduino MEGA R3 ATmega2560-16AU Development Compatible Board
In Stock
SKU:004985- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
In Stock
SKU:004981- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
In Stock
SKU:004968- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















