0
0 items
₹0.00
No products in the cart.
L293D Motor Driver/Servo Shield for Arduino
In Stock
SKU:007172- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
In Stock
SKU:007155- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
4.8-6V Servo Motor Tester
In Stock
SKU:007139- This is 4.8-6V Servo Motor Tester
- This offer 3 modes to check servos or ESC
- This servo motor tester connect to up to 3 servos simultaneously
- This can connect up to 3 ESCs to test and compare their reaction time respectively
- This servo motor tester is built with LED indicators
Two Trees DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
In Stock
SKU:007123- Maximum current: 7.2A, resolution: 0.1A
- Impulse response frequency: 200KHz
- DC power supply
- The input voltage range: 20-50 VDC.
- Power supply is greater than 200W. Recommend 20-50 VDC
- Operating Temperature: -10℃~45℃
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072
In Stock
SKU:007116- Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
- Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
- Supports MicroPython, enhancing development flexibility
- Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
- Ideal for wearables, IoT devices, and real-time motion tracking applications
- Compact design with headers pre-soldered for easy prototyping
- Perfect for hobbyists and professionals working on connected technology projects
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
MAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module
In Stock
SKU:007033- Integration Lowers System Cost, Simplifies Design
- Efforts, and Reduces Design Cycle Time
- High Accuracy Facilitates Meeting Error Budgets
- 15-Bit ADC Resolution; Nominal Temperature
- Resolution 0.03125NC (Varies Due to RTD Nonlinearity)
- Total Accuracy Over All Operating Conditions:
PCF8591 Module Analog to Digital / Digital-Analog Converter Module with F-F Jumper Wire
In Stock
SKU:007026- Module PCB size: 3.6cm * 2.3cm
- PCF8591 operating voltage range of 2.5V to 6V
- 4 analog inputs programmable as single-ended or differential inputs
- VCC power supply interface external 3.3v-5v
- 8-bit successive approximation A / D converter through an analog output DAC gain
HC-05 Bluetooth Module
In Stock
SKU:006984- Provide seamless wireless communication in various applications like GPS navigation systems, water meter readings, and electricity gas meter readings.
- This Bluetooth module allows you to easily switch between Master and Slave modes using AT Commands.
- Connect effortlessly with a wide range of devices such as Arduino, phones, laptops, and microcontrollers for a competitive price.
- The module uses USART for communication, making it compatible with microcontrollers supporting USART.
- You can easily configure the module's settings using the command mode, giving you control over your wireless connections.
- Perfect for connecting computers, mobile phones, and microcontrollers for data exchange and DIY, IoT, and Robotics Projects
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model: NCR18650 B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
FlySky FS-IA6B RF 2.4GHz 6CH PPM Output with iBus Port Receiver
In Stock
SKU:006892- High reliability, interference free 2.4GHz AFHDS2A signal operation.
- Transmitting Power of this reciever is ≤ 20 dBm.
- Easy to bind and very fast link-up.
- 6 channel receiver compatible i4 i6 i10 transmitter.
- Quick and extremely stable in performance.
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear
In Stock
SKU:006878 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo
ZD850 Hexa-Rotor Frame for Drone
In Stock
SKU:006869- This pure carbon fiber is ideal to withstand your drone standards.
- Ultra-Lightweight and Durable.
- Made by 100% 3K Twill super strong and lightweight carbon fiber.
- The frame has excellent strength.
- The arm has multiple motor mounting holes.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















