0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch
In Stock
SKU:005547Solderless 400 pin breadboard
In Stock
SKU:005531- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
Raspberry Pi 5 Model 8GB
Out of stock
SKU:005413HT12D Decoder IC
In Stock
SKU:009697- HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
- In simple terms, HT12D converts the serial input into parallel outputs.
- HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
- The data on 4-bit latch type output pins remain unchanged until new is received.
W25Q64 Nor Flash Storage Module 64Mbit
In Stock
SKU:009692- This is W25Q64 NorFlash Storage Module 64Mbit
- The Working voltage is 2.7V ~ 3.6V
- The Capacity is 64M-bit / 8M-byte.
- The Clock frequency is <104MHz.
- This has Greater flexibility and performance.
- This has Low energy consumption.
- It accompanies pin bar
Arduino IOT Bundle
Out of stock
SKU:008223- The Raspberry Pi 4B is integrated with a Broadcom 2711, Quad-Core Cortex A72 64-bit processor that operates at 1.5HZ and comes with an 8GB RAM.
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE.
- This Kit is best suitable for learning the basics of programming, coding and electronics, including current, voltage and digital logic
- No prior knowledge or experience is necessary as the kit guides you through step by step
- The Arduino Student kit ideal to use for remote teaching, homeschooling, and for self-learning
- The kit can also be integrated into different subjects such as physics, chemistry, and even history
Arduino MKR IoT Carrier Rev2 – ABX00073
Out of stock
SKU:008216- APDS-9960 sensor for light, proximity, color, and gestures.
- 5 capacitive touch buttons.
- Buzzer and 5 RGB LEDs.
- 2 relays for 24V devices.
- Environment monitoring capabilities.
- Customizable IoT interfaces.
- Grove connectors for additional sensors.
- Micro SD card slot for data storage.
Original Arduino Nano 33 IOT – ABX00027
Out of stock
SKU:008213- Equipped with a powerful SAMD21 Cortex-M0+ 32-bit low-power ARM MCU.
- Integrated u-blox NINA-W102 module for seamless WiFi and Bluetooth connectivity.
- Features ATECC608A for secure data encryption and communication.
- Includes an LSM6DS3 6-axis sensor, perfect for motion and orientation detection.
- Operates at a rapid 48MHz for efficient performance.
- Functions at a standard 3.3V, compatible with most electronics projects.
Original Arduino Nano Every – ABX00028
Out of stock
SKU:008208- Powered by ATMega4809 for enhanced performance.
- Operates at 20MHz for smooth and efficient processing.
- Offers 48KB for code and program storage.
- Equipped with 256 bytes of EEPROM for reliable data storage.
- Provides 6KB for dynamic data handling and flexibility.
Arduino Micro with Headers A000053
In Stock
SKU:008203- The Arduino Micro board is built with an ATmega32U4 microcontroller.
- This Arduino Micro features 20 digital input/output pin and a 16 MHz crystal oscillator.
- Simply connect it to a computer with a micro USB cable to get started.
Arduino Nano 33 IOT Headers ABX00032
In Stock
SKU:008196- The Arduino Nano 33 IoT is based on the SAMD21 microcontroller.
- The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range.
- The Arduino Nano has an operating voltage of 3.3V.
- It is integrated with 14 digital input-output pins, 11 PWM pins, a UART, an SPI and an I2C interface.
Waveshare 4.3inch DSI LCD Capacitive Touch Display 800×480 for Raspberry Pi
In Stock
SKU:008191-
4.3-inch capacitive touch display with 800×480 resolution for Raspberry Pi
-
Connects directly to Raspberry Pi via DSI interface for easy setup
-
Supports 5-point multi-touch for interactive projects
-
Compatible with Raspberry Pi 4B/3B+/3B/Zero W/Zero 2 W models
-
Built-in backlight control for adjustable brightness
-
Plug and play design with no additional drivers needed
-
Includes protective case for durability and mounting
Waveshare 2-Channel CAN FD HAT Raspberry Pi Expansion Board
In Stock
SKU:008182- Waveshare CAN FD HAT adding 2-channel CAN bus capabilities to Raspberry Pi.
- Supports both traditional CAN 2.0 and high-speed CAN FD protocols.
- Standard Raspberry Pi 40PIN GPIO, compatible with Raspberry Pi series and Jetson Nano.
- Multi-protection circuits: 5KV electrical isolation, 500W lightningsurge, ESD, and short circuit protection.
- Features MCP2518FD CAN controllers and SPI control bus.
- Onboard voltage translator (3.3V/5V) and 120Ω terminal resistor, configurable via jumpers.
- Ideal Raspberry Pi CAN FD HAT for automotive and industrial automation.
Official Raspberry Pi Zero
Out of stock
SKU:008177- Small, affordable single-board computer.
- 1GHz CPU and 512MB RAM.
- Mini HDMI® and micro USB OTG ports.
- 40-pin HAT-compatible header.
- Composite video, reset headers, and CSI camera connector.
Raspberry Pi Pico W Ultimate Kit with Manual
Out of stock
SKU:008172- This Raspberry Pi Pico W Ultimate kit is very useful and helpful for kids who are interested in getting started with technology.
- This Ultimate kit includes Raspberry Pi Pico W with Headers, micro USB cable, soil and moisture sensor, rain sensor, mini pump, DHT11 module, 5V 1 Channel Relay module, 16x2 LCD with I2C Module, MQ135 Gas Sensor, RGB CC LED, BMP180 pressure sensor and Buzzer Module.
- Along with the Raspberry Pi Pico W kit components, you will also get a manual that includes 10 experiments and step by step guide to them.
Official Raspberry Pi 4 8gb Starter Kit with 7 inch Touchscreen Display
In Stock
SKU:008162- Powerful Performance: 8GB RAM Raspberry Pi 4 Model B - ideal for beginners and enthusiasts, powerful processor ensures smooth operation.
- Perfect for building your own computer: Includes everything you need - Raspberry Pi 4 board, official 7" touchscreen display, case, power adapter, HDMI cable, and 32GB MicroSD card.
- Official Touch Display: Enjoy a responsive 7" touchscreen display (800x480 pixels) for intuitive control. Great for browsing, gaming, and multimedia applications.
- Durable Case: High-quality case with dual cooling fans keeps your Raspberry Pi cool and protected. Ideal for extended use and overclocking.
- Easy to Use & Maintain: Designed for beginners and enthusiasts. Get started quickly with the included accessories and online resources. Perfect for learning programming, electronics, and building your own projects.
- Keyboard and mouse are not included in this kit. We recommend get them separately.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














