0
0 items
₹0.00
No products in the cart.
We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
In Stock
SKU:008681- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
4 Channel Relay Module 24V High and Low Level Trigger Relay Module
In Stock
SKU:008676- Work Voltage: 24VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
In Stock
SKU:008672- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
8 Road/Channel Relay Module (with light coupling) 24V
In Stock
SKU:008668- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
2 Channel 12V High and Low Level Trigger Relay Module
In Stock
SKU:008663- Default Relay trigger Setting : Low-Level
- Logic Input (V) : 3.3 ~ 5
- Trigger Voltage (VDC) : 12
- Switching Voltage (VAC) : 250@10A
- Switching Voltage (VDC) : 30@10A
5V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
In Stock
SKU:008658- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
4 Channel Relay Module 5V High and Low Level Trigger Relay Module
In Stock
SKU:008655- Work Voltage: 5VDC
- Quiescent Current: 5 mA
- Max Current: 190 mA
- Trigger Current: 3-5 mA
- Low-Level Trigger Current: 0-1.5V
- High-Level Trigger Current: 3-5V
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
In Stock
SKU:008650- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
In Stock
SKU:008644- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
5V 1 Channel Without Light Coupling Relay
In Stock
SKU:008570- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
Timing Delay Switch Circuit with Double MOSFET Control
In Stock
SKU:008565- Wide voltage power supply (6~30V)
- supports micro USB 5.0V power supply
- The interface is clear and simple, powerful, easy to understand
- All set parameters automatically save power.
150W AC-DC Buck Converter 100V-240V to 24V 6A Step Down Power Supply Module
In Stock
SKU:AB1006- Input Voltage : AC 100 – 240 V(50 HZ/60 HZ).
- Output Voltage: DC 24V.
- Output Current : Peak 6A and Nominal 5.5A (no voltage drop).
- Output Power : 150W (maximum 220 W).
- Overload Protection: Yes.
- Over Current Protection : Yes.
- Short Circuit Protection: Yes.
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
Arduino Micro with Headers A000053
In Stock
SKU:008203- The Arduino Micro board is built with an ATmega32U4 microcontroller.
- This Arduino Micro features 20 digital input/output pin and a 16 MHz crystal oscillator.
- Simply connect it to a computer with a micro USB cable to get started.
Arduino Nano 33 IOT Headers ABX00032
In Stock
SKU:008196- The Arduino Nano 33 IoT is based on the SAMD21 microcontroller.
- The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range.
- The Arduino Nano has an operating voltage of 3.3V.
- It is integrated with 14 digital input-output pins, 11 PWM pins, a UART, an SPI and an I2C interface.
Waveshare 4.3inch DSI LCD Capacitive Touch Display 800×480 for Raspberry Pi
In Stock
SKU:008191-
4.3-inch capacitive touch display with 800×480 resolution for Raspberry Pi
-
Connects directly to Raspberry Pi via DSI interface for easy setup
-
Supports 5-point multi-touch for interactive projects
-
Compatible with Raspberry Pi 4B/3B+/3B/Zero W/Zero 2 W models
-
Built-in backlight control for adjustable brightness
-
Plug and play design with no additional drivers needed
-
Includes protective case for durability and mounting

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















