0
0 items
₹0.00
No products in the cart.
1200w DC DC Boost Step Up Converter 8-60V to 12-83V 20A
Out of stock
SKU:006731- Input voltage :10-60V
- Output voltage: 12-83V (adjustable)
- Output Current: 12A
- Input Current: 20A
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable
Out of stock
SKU:006712- Output Current: 1.5A (minimum), 2.2A (typ)
- Input and output voltage difference (VI-VO): 40Vdc (max)
- Adjustable output voltage range: 1.2 ~ 37V
- Operating temperature: -55 to +150
- Output Current: 1.5A
- Input voltage: 4.2 ~ 40 V
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
In Stock
SKU:006689 SKU: AE1020
Add to cart
- This is 2000W 220V AC Motor Speed Controller Voltage Regulator
- This voltage regulator uses novel bi-directional high-power SCR.
- The input voltage of this voltage regulator can be between 110V ~ 220V AC
- The output voltage:50V-220V(Output voltage < = Input supply voltage)
- The maximum output power is 2000W and the maximum output current is 25A
- The size of this SCR is 1.85x1.38x1 inches
- The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
- This has High efficiency, high torque, low heat generating
SD Card Module
Out of stock
SKU:006673- The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
- Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
- MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
NEO-6M GPS Module with EPROM
In Stock
SKU:006664- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
5V 16 Channel Relay Module
Out of stock
SKU:006656- Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
- Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
- Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
- Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
- Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
- Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
- Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
12V 4CH Relay Board
In Stock
SKU:006651- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
2 CH 12V Relay Board
In Stock
SKU:006646- The board is a 2 channel relay which works on 12V.
- The input signal can come directly from a microcontroller.
- Each relay can switch the variety of AC or DC high voltage.
- Current loads working at 110V or 220V AC mains like lights, fans, motors and such
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
Out of stock
SKU:006555- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
Seeed Studio XIAO RP2040 Development Board Supports Arduino,
Out of stock
SKU:006513- Compact and Arduino-compatible development board based on Raspberry Pi RP2040
- Thumb-sized, surface-mount design for space-saving applications
- Supports Arduino, MicroPython, and CircuitPython programming
- Ideal for learning coding, electronics, and prototyping
- Cost-effective solution with a wide range of compatible libraries
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++
Out of stock
SKU:006503- Compact development board powered by Raspberry Pi RP2350
- Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
- Supports MicroPython, C, and C++ development
- 19 multifunction GPIOs, RGB LED, and Battery Management System
- Ultra-low power consumption (27ÎĽA) with battery power supply
- Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0
Out of stock
SKU:006497- Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
- Bluetooth 5.0
- Wireless connect
- Onboard 2 MB flash
- Embedded machine learning projects
GSM SIM800C Modem with Antenna
In Stock
SKU:006150- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32
TTGO T-Call V1.4 ESP32 SIM800L Wireless Communication Module
Out of stock
SKU:006144- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
RF433 MHz Transmitter Receiver Wireless Module
In Stock
SKU:006138- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
RF Transmitter Receiver Module 433MHz Wireless Link Kit
In Stock
SKU:006135- Operating voltage: 5V.
- Quiescent Current: 4mA.
- Receiving frequency: 433 MHz.
- Receiver sensitivity: -105 dB.
- Communication Distance (m): 20 ~ 200 meter.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















