0
0 items
₹0.00
No products in the cart.
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266
Out of stock
SKU:007186- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:007159- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3S 60A Lithium Battery Charger BMS 18650 Protection Module Circuit
In Stock
SKU:007155- 3S 11.1V 12.6V 60A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power 135W below.
5S Lithium Battery Protection Board
In Stock
SKU:007039- Charging voltage: 21V
- Charging current: 56 A
- Continuous discharge current: 15 A
- Over current protection: 50/55/60 A
- Over current protection delay: 20/25/30 mS
- Single section power consumption since: 30uA
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
SIM800L V2 GSM GPRS Module
Out of stock
SKU:007013- Supports GSM (voice, SMS) and GPRS
- Quad-band (850/900/1800/1900 MHz) for global use
- Compatible with Arduino, with built-in regulator and TTL converter
- Compact design for versatile applications
- Easy SIM replacement with card slot
- Gold-plated board for stability
HC-05 Bluetooth Module
In Stock
SKU:006984- Provide seamless wireless communication in various applications like GPS navigation systems, water meter readings, and electricity gas meter readings.
- This Bluetooth module allows you to easily switch between Master and Slave modes using AT Commands.
- Connect effortlessly with a wide range of devices such as Arduino, phones, laptops, and microcontrollers for a competitive price.
- The module uses USART for communication, making it compatible with microcontrollers supporting USART.
- You can easily configure the module's settings using the command mode, giving you control over your wireless connections.
- Perfect for connecting computers, mobile phones, and microcontrollers for data exchange and DIY, IoT, and Robotics Projects
- Model No.: INR18650 M26
- Capacity (mAh): 2600
- Output Voltage: 3.7V
- Charge Rate: 1C
- High energy density
- High working voltage for single battery cells.
- Pollution-free
- Long cycle life
PANASONIC NCR18650B 3350mAh (1c) LI-ION BATTERY – A grade
In Stock
SKU:006965- Brand: PANASONIC
- Model: NCR18650 B
- Rated voltage: 3.6-4.2 V
- Battery Capacity: 3350 mAh
- Charging time; Standard charge 4hours/100mA deadline
- Quick charge: 2hours/100mA deadline (25 °C)
- Dimension: As per the Standard 18650 Battery
iMax B6 Digital LiPo Battery Charger
In Stock
SKU:006835- Advanced charger capable of charging, balancing, and discharging multiple types of batteries
- Microprocessor controlled for precise charging and balancing
- Can charge at rates from 0.1 to 5.0A and is compatible with up to 6S packs
- Input voltage protection to prevent draining of car battery
- Equipped with JST-XH charge plug compatible with various battery packs
- Ideal for hobbyists, drone enthusiasts, and electronics enthusiasts
iMAX B6-AC B6AC Lipo NiMH RC Battery Balance Charger
In Stock
SKU:006830 Operation voltage range: DC 11.0 ~ 18.0 V AC 100V ~ 240V 50/60Hz
Max. charge power:50W
Charge current range:0.1~5.0A
Circuit power :AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
Max. discharge power :Max. discharge power5W
Add to cart
3S 12V 25A 18650 Lithium Battery Protection Board
In Stock
SKU:006810- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
In Stock
SKU:006803- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester Rated 5.00 out of 5 based on 1customer rating
In Stock
SKU:006787- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
NEO-6M GPS Module with EPROM
In Stock
SKU:006664- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio
Out of stock
SKU:006555- Compact and powerful LED driver board supporting 5V & 12V LED strips
- Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
- Works with all XIAO boards, especially XIAO ESP32 Series
- Supports smart control via WLED and Home Assistant
- Offers flexible power options and built-in safety protection
Seeed Studio XIAO RP2040 Development Board Supports Arduino,
Out of stock
SKU:006513- Compact and Arduino-compatible development board based on Raspberry Pi RP2040
- Thumb-sized, surface-mount design for space-saving applications
- Supports Arduino, MicroPython, and CircuitPython programming
- Ideal for learning coding, electronics, and prototyping
- Cost-effective solution with a wide range of compatible libraries

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















