Filter

Showing 1–16 of 26 resultsSorted by popularity

Sort:
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹34,999.00.Current price is: ₹21,499.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹400.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
Out of stock
SKU:006560
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Add to cart
Official Arduino UNO Q Single Board Computer Model 2GB ABX00162

Official Arduino UNO Q Single Board Computer Model 2GB ABX00162

Original price was: ₹7,999.00.Current price is: ₹6,749.00.
In Stock
SKU:007273
  1. Hybrid single board computer with dual-brain architecture
  2. Combines Qualcomm® Dragonwing™ QRB2210 MPU and STM32U585 MCU
  3. Supports AI-powered vision and sound applications
  4. Fully compatible with Arduino UNO ecosystem and shields
  5. Develop using Arduino IDE, Arduino Cloud, or Python® on Linux® Debian
  6. Includes pre-built examples, AI models, and Qwiic connector for modules
Add to cart
Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Official Arduino Nano 33 BLE Rev2 Development Board with Headers – ABX00072

Original price was: ₹2,749.00.Current price is: ₹1,977.00.
In Stock
SKU:007116
  • Powered by nRF52840 32-bit Arm Cortex-M4 CPU @ 64 MHz
  • Integrated Bluetooth Low Energy (Bluetooth LE) for wireless communication
  • Supports MicroPython, enhancing development flexibility
  • Built-in 9-axis IMU for accurate motion, orientation, and acceleration sensing
  • Ideal for wearables, IoT devices, and real-time motion tracking applications
  • Compact design with headers pre-soldered for easy prototyping
  • Perfect for hobbyists and professionals working on connected technology projects
Add to cart
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
Out of stock
SKU:006555
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Read more
Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Original price was: ₹1,399.00.Current price is: ₹912.00.
Out of stock
SKU:006513
  • Compact and Arduino-compatible development board based on Raspberry Pi RP2040
  • Thumb-sized, surface-mount design for space-saving applications
  • Supports Arduino, MicroPython, and CircuitPython programming
  • Ideal for learning coding, electronics, and prototyping
  • Cost-effective solution with a wide range of compatible libraries
Read more
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Original price was: ₹1,499.00.Current price is: ₹1,097.00.
Out of stock
SKU:006503
  • Compact development board powered by Raspberry Pi RP2350
  • Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
  • Supports MicroPython, C, and C++ development
  • 19 multifunction GPIOs, RGB LED, and Battery Management System
  • Ultra-low power consumption (27μA) with battery power supply
  • Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Read more
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Original price was: ₹1,499.00.Current price is: ₹1,116.00.
Out of stock
SKU:006497
  • Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
  • Bluetooth 5.0
  • Wireless connect
  • Onboard 2 MB flash
  • Embedded machine learning projects
Read more
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

Original price was: ₹399,999.00.Current price is: ₹369,999.00.
In Stock
SKU:006039

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

Original price was: ₹344,999.00.Current price is: ₹259,999.00.
In Stock
SKU:006016

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

Original price was: ₹224,999.00.Current price is: ₹214,999.00.
In Stock
SKU:006008
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab X1 – Carbon Combo 3D Printer

Bambu Lab X1 – Carbon Combo 3D Printer

Original price was: ₹249,499.00.Current price is: ₹149,999.00.
In Stock
SKU:005981
  • Multi Color & Multi Material Capability
  • Proven reliability trusted by professionals
  • High quality printing with 7 μm Lidar Resolution
  • High speed CoreXY with 20000 mm/s² Acceleration
  • Dual Auto Bed Leveling
  • The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing.
Add to cart
Bambu Lab P1S 3D Printer

Bambu Lab P1S 3D Printer

Original price was: ₹56,999.00.Current price is: ₹50,999.00.
In Stock
SKU:005962
  1. Max Build Plate Temp: 100°C
  2. Max Tool Head Speed: 500 mm/s
  3. Max Tool Head Acceleration: 20 m/s
Add to cart
Bambu Lab P1S Combo 3D Printer

Bambu Lab P1S Combo 3D Printer

Original price was: ₹77,499.00.Current price is: ₹67,999.00.
In Stock
SKU:005958
  1. Max hot end temp: 300°C
  2. Compatible with multiple Bambu plates
  3. Max build plate temp: 100°C
  4. Max tool head speed: 500 mm/s
  5. Max tool head acceleration: 20 m/s²

Add to cart

Filter Products

Categories

Filter by price

Product Status