Filter
Sort:
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Add to cart
MB102 830 Points Solderless Prototype PCB Breadboard High Quality

MB102 830 Points Solderless Prototype PCB Breadboard High Quality

Original price was: ₹99.00.Current price is: ₹52.00.
In Stock
SKU:005551
  • SKU : AE1001
  1. Mb102 Bread Board
  2. 830 Solder-less Points
  3. Ideal for Experimenting With Circuit Design In Labs
  4. Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
  5. Colored coordinates for easy components placement.
Add to cart
8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch

8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch

Original price was: ₹79.00.Current price is: ₹59.00.
In Stock
SKU:005547
Add to cart
Solderless 400 pin breadboard

Solderless 400 pin breadboard

Original price was: ₹50.00.Current price is: ₹30.00.
In Stock
SKU:005531
  1. 400 tie points
  2. 2 Power lanes, Total 100 tie points in power lanes
  3. 1 Double strip, Total 300 tie points
  4. Perfect for Arduino shield prototyping and testing
  5. Plastic housing, metal contact clips
Add to cart
HT12D Decoder IC

HT12D Decoder IC

Original price was: ₹99.00.Current price is: ₹56.00.
In Stock
SKU:009697
  • HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
  • In simple terms, HT12D converts the serial input into parallel outputs.
  • HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
  • The data on 4-bit latch type output pins remain unchanged until new is received.
Add to cart
W25Q64 Nor Flash Storage Module 64Mbit

W25Q64 Nor Flash Storage Module 64Mbit

Original price was: ₹99.00.Current price is: ₹64.00.
In Stock
SKU:009692
  • This is W25Q64 NorFlash Storage Module 64Mbit
  • The Working voltage is  2.7V ~ 3.6V
  • The Capacity is 64M-bit / 8M-byte.
  • The Clock frequency is <104MHz.
  • This has Greater flexibility and performance.
  • This has Low energy consumption.
  • It accompanies pin bar
Add to cart
Solenoid valve switch 12V DC 1/2 inch (Normally Closed)

Solenoid valve switch 12V DC 1/2 inch (Normally Closed)

Original price was: ₹349.00.Current price is: ₹197.00.
In Stock
SKU:006634
  • This is the Solenoid valve 12V
  • This is suitable for fluids like water, oil, air.
  • This prevents the dry burning and provide a steady flow
  • This is Precise and reliable.
  • This valve is Compact and convenient.
  • This is easily installed and serviced
Add to cart
6 Flexible Arms Soldering Station With Swiveling Alligator Clip

6 Flexible Arms Soldering Station With Swiveling Alligator Clip

Original price was: ₹1,899.00.Current price is: ₹1,653.00.
Out of stock
SKU:006282
  • Total Weight: 400 gm
  • Each Arm length: 34 cm
  • Alligator clip(L): 44mm (large size)
  • Alligator clips maximum thickness limit: 6mm
  • Built-in Trays for components and screws.
  • 6 flexible arms each with a large swiveling alligator clip.
  • 6+1 pockets in beautifully base to hold loose components.
  • 6 Silicon clip tips for the ultimate heat resistance.
Read more
C-4 Soldering Iron Support Stand with Cleaning Sponge

C-4 Soldering Iron Support Stand with Cleaning Sponge

Original price was: ₹249.00.Current price is: ₹163.00.
In Stock
SKU:006277
  • Heavy duty metal base featuring a reinforced spring holder.
  • Supplied complete with cleaning sponge.
  • Dimensions: 130 x 88 mm
  • Color: Black
Add to cart
Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light

Multi-function LED Magnifier PCB Soldering iron Stand Holder Table Magnifying glass 35X 12X w/ 2-LED Light

Original price was: ₹549.00.Current price is: ₹517.00.
In Stock
SKU:006273
  • A useful Aid for soldering work or model makers
  • Battery required for light: 3 x AAA
  • Adjustable crocodile holding clamps
  • The bottom battery compartment is furnished with steel plate which can enhance stability
  • Ideal when a third hand is needed
  • With two LED lighting, this model can work very well in the dark environment
Add to cart
Noel 60W Temperature controlled Analog soldering Iron

Noel 60W Temperature controlled Analog soldering Iron

Original price was: ₹749.00.Current price is: ₹649.00.
In Stock
SKU:006268
  • Product: Digital soldering Iron
  • Power: 60W
  • Brand: Noel
  • Temperature controlled
  • Constant Temperature: – 200’C(392F) – 500’C(824F)
Add to cart
CR 10 Smart 3D Printer

CR 10 Smart 3D Printer

₹44,999.00
In Stock
SKU:006100
  • Print Tech.: FDM
  • Print Size: 300*300*400mm
  • Product Size: 578*522*648mm
  • Printing Precision: ±0.1mm
  • Nozzle Diameter: 0.4mm
  • Hot Bed Temp: ≤100℃
  • Nozzle Temp: ≤260℃
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

Original price was: ₹399,999.00.Current price is: ₹369,999.00.
In Stock
SKU:006039

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

Original price was: ₹344,999.00.Current price is: ₹259,999.00.
In Stock
SKU:006016

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

Original price was: ₹224,999.00.Current price is: ₹214,999.00.
In Stock
SKU:006008
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart

Filter Products

Categories

Filter by price

Product Status