Filter

Showing 1–16 of 131 resultsSorted by popularity

Sort:
16×2 LCD Module (Green)

16×2 LCD Module (Green)

Original price was: ₹149.00.Current price is: ₹105.00.
In Stock
SKU:007000
  • Dimmable LED backlight with resistor or PWM
  • 16 characters, 2 rows
  • Controlled with 6 digital lines
  • Operates on 2.7V to 5.5V
  • LCD driver power: 3.0V to 11V
  • AC waveform liquid crystal drive
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Pink crystal- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010405
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

eSun 1.75mm PLA-Basic 3D Printing Filament 1kg orange Color

Original price was: ₹1,999.00.Current price is: ₹1,454.00.
Out of stock
SKU:3D1001
  • High-quality PLA Basic 3D printing filament in vibrant orange color
  • Diameter: 1.75mm, Weight: 1kg spool
  • Enhanced fluidity and fast printing with max volume flow rate ~30mm³/s
  • Easy to print, low odor, and minimal stringing
  • Excellent molding quality with no warping
  • Eco-friendly and cost-effective 3D printer filament for everyday use
Read more
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)

Original price was: ₹649.00.Current price is: ₹400.00.
In Stock
SKU:004972
  • Operating Voltage: 5V
  • MCU: ATMEGA 328P
  • Input Voltage (recommended): 7-12V.
  • Input Voltage (limit): 6-20V.
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
Add to cart
eSUN PLA Transparent Glass light blue

eSUN PLA Transparent Glass light blue

Original price was: ₹1,499.00.Current price is: ₹1,399.00.
In Stock
SKU:010497
  1. Diameter : 1.75mm.
  2. Melting point: 210Âşc.
  3. Color : Glass Light Blue
  4. Weight : 1 kg.
Add to cart
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent orange grey- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent orange grey- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
Out of stock
SKU:010447
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

eSUN PLA-Clear Rainbow filament- 1.75mm- Translucent blue white- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
Out of stock
SKU:010401
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Read more
eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

eSun PLA-Basic 1.75mm 3D Printing Filament 1kg White Color

Original price was: ₹1,699.00.Current price is: ₹1,299.00.
Out of stock
SKU:010285
  • High-speed 3D printer filament designed for fast and smooth prints
  • 1.75mm PLA basic filament with consistent diameter and strong layer adhesion
  • 1KG spool (2.2 lbs) in premium White color, perfect for professional and DIY use
  • Compatible with most FDM/FFF 3D printers
  • Low warping, minimal odor, and excellent surface finish
Read more
MB102 830 Points Solderless Prototype PCB Breadboard High Quality

MB102 830 Points Solderless Prototype PCB Breadboard High Quality

Original price was: ₹99.00.Current price is: ₹52.00.
In Stock
SKU:005551
  • SKU : AE1001
  1. Mb102 Bread Board
  2. 830 Solder-less Points
  3. Ideal for Experimenting With Circuit Design In Labs
  4. Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
  5. Colored coordinates for easy components placement.
Add to cart
8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch

8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch

Original price was: ₹79.00.Current price is: ₹59.00.
In Stock
SKU:005547
Add to cart
Solderless 400 pin breadboard

Solderless 400 pin breadboard

Original price was: ₹50.00.Current price is: ₹30.00.
In Stock
SKU:005531
  1. 400 tie points
  2. 2 Power lanes, Total 100 tie points in power lanes
  3. 1 Double strip, Total 300 tie points
  4. Perfect for Arduino shield prototyping and testing
  5. Plastic housing, metal contact clips
Add to cart
eSUN PLA-UV Color Change filament- 1.75mm- UV change Blue- 1kg/roll- with paper roll

eSUN PLA-UV Color Change filament- 1.75mm- UV change Blue- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
In Stock
SKU:010522
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Add to cart
eSUN PLA-UV Color Change filament- 1.75mm- UV change Fuchsia- 1kg/roll- with paper roll

eSUN PLA-UV Color Change filament- 1.75mm- UV change Fuchsia- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
In Stock
SKU:010519
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Add to cart
eSUN PLA-UV Color Change filament- 1.75mm- UV change Orange- 1kg/roll- with paper roll

eSUN PLA-UV Color Change filament- 1.75mm- UV change Orange- 1kg/roll- with paper roll

Original price was: ₹1,699.00.Current price is: ₹1,497.00.
In Stock
SKU:010515
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Add to cart
eSUN PLA-UV Color Change filament- 1.75mm- UV change Red- 1kg/roll- with paper roll

eSUN PLA-UV Color Change filament- 1.75mm- UV change Red- 1kg/roll- with paper roll

Original price was: ₹1,799.00.Current price is: ₹1,497.00.
In Stock
SKU:010510
  1. Good toughness
  2. strong impact resistance
  3. High speed printing
  4. Smooth printed surface
  5. Easy to print
  6. Hard to break
Add to cart
eSUN PLA filament Glass lemon yellow

eSUN PLA filament Glass lemon yellow

Original price was: ₹1,499.00.Current price is: ₹1,396.00.
In Stock
SKU:010500
  1. Diameter : 1.75mm.
  2. Melting point: 210Âşc.
  3. Colour: Glass Lemon Yellow
  4. Weight : 1 kg.
Add to cart

Filter Products

Categories

Filter by price

Product Status