0
0 items
₹0.00
No products in the cart.
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
Out of stock
SKU:006592- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
720 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW
In Stock
SKU:006083- Model: 720
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Current: 0.1 A.
- Rated RPM: 48000.
- Max Speed: 50000 RPM.
- Wire Length: 5cm
Bambu Lab A1 Mini 3D Printer
In Stock
SKU:005941- Plug-N-Play Convenience
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High-Speed Precision
- Active Flow Rate Compensation
APM 2.8 Flight Controller with Built-in Compass
In Stock
SKU:007098- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
S500 HMF S550 Replacement Frame Arm(Black)
Out of stock
SKU:006616- Material: Polyamide Nylon
- Weight: 50 gm
- Size: 233 ×40 (LxW) mm
- Motor Mounting Holes Dia.: 3 mm
- Compatible Frame: S500 & S550
S500 Carbon Fiber Quadcopter Drone Frame Kit
Out of stock
SKU:006596- High-Quality Carbon fiber Material Frame
- Comes With Landing Gear
- Power Distribution Board Pre Installed
- Easy to Assemble kit
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0
Out of stock
SKU:006560- Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
- Supports Wi-Fi & Bluetooth 5.0 connectivity
- Built-in 2.4GHz rod antenna for a stable signal
- Ultra-low power consumption with deep sleep mode (14μA)
- Integrated lithium battery charging management
- Compact ESP32 S3 development board ideal for IoT and robotics
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver
In Stock
SKU:006044- Transmitter: FS-i6X (6 Channels)
- Receiver: FS-iA10B (10 Channels)
- RF Range: 2.408-2.475 GHz
- RF Power : < 20 dBm
- RF Channel: 135
- Bandwidth: 500 kHz
- Total Weight: 392 gm
- Power: 6V DC 1.5A
Bambu Lab A1 Combo 3D Printer
In Stock
SKU:005931- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
In Stock
SKU:005551- SKU : AE1001
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch
In Stock
SKU:005547Solderless 400 pin breadboard
In Stock
SKU:005531- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
HT12D Decoder IC
In Stock
SKU:009697- HT12D is a decoder integrated circuit that belongs to 2^12 series of decoders.
- In simple terms, HT12D converts the serial input into parallel outputs.
- HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits
- The data on 4-bit latch type output pins remain unchanged until new is received.
W25Q64 Nor Flash Storage Module 64Mbit
In Stock
SKU:009692- This is W25Q64 NorFlash Storage Module 64Mbit
- The Working voltage is 2.7V ~ 3.6V
- The Capacity is 64M-bit / 8M-byte.
- The Clock frequency is <104MHz.
- This has Greater flexibility and performance.
- This has Low energy consumption.
- It accompanies pin bar
FlySky FS-IA6B RF 2.4GHz 6CH PPM Output with iBus Port Receiver
In Stock
SKU:006892- High reliability, interference free 2.4GHz AFHDS2A signal operation.
- Transmitting Power of this reciever is ≤ 20 dBm.
- Easy to bind and very fast link-up.
- 6 channel receiver compatible i4 i6 i10 transmitter.
- Quick and extremely stable in performance.
ZD680 680mm Carbon Fiber Quadcopter Frame Kit with Carbon Fiber Landing Gear
In Stock
SKU:006878 Motor: 3508
- Prop: 15 inch CW CCW
- ESC: 30A(2-6s) ; 40A (2-4S)
- Flight control: APM opensource flight control
- Battery: 4-6S Lipo

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















