0
0 items
₹0.00
No products in the cart.
Quectel EC200U 4G/GSM Module with GPS/GNSS
In Stock
SKU:008249- Supply Voltage (Vbat): 3.7V – 4V
- USB-C: 3.7V – 5V
- Operating temperature: -35 °C to +75 °C
- Support nano SIM card
- Support CAT 1 FDD & TDD
- Support GPRS multi-slot class 12
- Baud rates up to 921600 bps
Sim800L GSM GPRS Module
In Stock
SKU:009710- This is Sim 800L GSM - GPRS Module
- Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
- Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
- Compact size and low current consumption, ideal for small projects
- Interfaces with any microcontroller for GSM functionality
- Enables making and receiving phone calls
- Supports sending and receiving SMS messages
- Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
- TTL serial interface with automatic baud rate detection
- Power-saving features with low current consumption, including sleep mode with as low as 1mA
Bambu Lab A1 Mini 3D Printer
In Stock
SKU:005941- Plug-N-Play Convenience
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High-Speed Precision
- Active Flow Rate Compensation
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker
In Stock
SKU:005158- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
NRF24L01+PA+LNA
In Stock
SKU:006683- This is NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Uses Nordic Semiconductor's 2.4GHz transceiver, the NRF24L01+.
- Comes with many new features, such as additional pipelines, buffers, and an auto-retransmit function.
- Board has a reverse-polarized SMA connector and a PA and LNA circuit for long-distance communication.
- Achieves a communication distance of 800-1K meters with a transmission rate of 250Kbps on open-air.
- Compatible with various systems, including MCU/ARM/PIC/AVR/STM32.
- Low cost and software programming is fully compatible with NRF24L01 modules.
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
In Stock
SKU:004972- Operating Voltage: 5V
- MCU: ATMEGA 328P
- Input Voltage (recommended): 7-12V.
- Input Voltage (limit): 6-20V.
- Digital I/O Pins: 14
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
ESP32-WROOM-32 38Pin Development Board
Out of stock
SKU:007840
WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications
Read more
Arduino NANO ESP32 with Headers – ABX00083
Out of stock
SKU:007253- Integrating ESP32-S3 power into Arduino for IoT and MicroPython applications.
- The footprint is nano-sized, making it easy to incorporate in independent projects.
- Use Wi-Fi and Bluetooth connection enabled by the ESP32-S3 with complete Arduino compatibility.
- Easily switch between Arduino and MicroPython programming.
- With Arduino IoT Cloud, you can easily construct IoT projects that communicate securely.
- Emulate human interface devices via USB to expand interaction options.
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0
Out of stock
SKU:006560- Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
- Supports Wi-Fi & Bluetooth 5.0 connectivity
- Built-in 2.4GHz rod antenna for a stable signal
- Ultra-low power consumption with deep sleep mode (14μA)
- Integrated lithium battery charging management
- Compact ESP32 S3 development board ideal for IoT and robotics
Bambu Lab A1 Combo 3D Printer
In Stock
SKU:005931- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board
In Stock
SKU:005855- Power supply: DC 6.5-16v and USB 5V
- GVS output power supply: 5V or 3.3V
- No. Of Pins: 30PIN
- Processor Count: 2
DFRobot 2.4GHz 6dBi Antenna with IPEX Connector
In Stock
SKU:008452- Frequency: 2.4 GHz
- Gain: 6dBi
- Cable Length: 15cm
- Interface: IPEX MHF1
- Supports LattePanda V1
- Height: 170 mm/ 6.7 inches
25CM IPEX 1 to RP-SMA Female Connector Cable 11mm RG1.13
In Stock
SKU:00845030CM IPEX1 to SMA Female Connector Cable 11mm RG1.13
In Stock
SKU:008448- 30CM IPEX1 to SMA Female Connector Cable 11mm RG1.13
- Cable Type: RG1.13
- Cable Length: 30cm
- Connector Length: 11mm
50CM IPEX 1 to RP-SMA Female Connector Cable 11mm
In Stock
SKU:00844615CM IPEX 1 to RP-SMA Female Connector Cable 11mm RG178
Out of stock
SKU:008444- IPEX 1 to RP-SMA Female connectors
- 11mm RG178
- Reliable signal transmission
- Compact and robust design

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.














