Filter
Sort:
L293D Motor Driver Module

L293D Motor Driver Module

Original price was: ₹129.00.Current price is: ₹76.00.
In Stock
  1. The driver two holes of 3 mm dia.
  2. Male burg-stick connectors for supply, ground and input connection.
  3. Screw terminal connectors for easy motor connection.
  4. High noise immunity inputs.
  5. Operating Voltage(VDC): 4.5 to 12
Add to cart
RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

RS390 RS-390 390 6V-24V 4200-18900 RPM Carbon Brush DC Motor

Original price was: ₹199.00.Current price is: ₹149.00.
In Stock
Add to cart
1.8V – 12V/2A DC Motor PWM Speed Regulator

1.8V – 12V/2A DC Motor PWM Speed Regulator

Original price was: ₹99.00.Current price is: ₹67.00.
In Stock
  1. Input supply voltage: 1.8V- 15V DC.
  2. The maximum output power: 30W
  3. Output current : 2A(Max).
  4. With resettable fuse.
  5. Equipped with LED indicator.
  6. Potentiometer with switch function for PWM adjustment.
Add to cart
DC Motor 9 Volts

DC Motor 9 Volts

Original price was: ₹49.00.Current price is: ₹15.00.
In Stock
Add to cart
PCA9685 16 Channel Servo Motor Drive

PCA9685 16 Channel Servo Motor Drive

Original price was: ₹449.00.Current price is: ₹219.00.
In Stock
  • This is PCA9685 16 Channel Servo Motor Driver(Soldered)
  • The operating voltage: 2.3V to 5.5V
  • This has 5.5V tolerant inputs
  • This can operate at minus 40 degrees Celsius to 85 degrees Celsius
  • Software reset feature (SWRST Call) allows the device via I2C bus reset
  • 25MHz internal oscillator requires no external components
  • The maximum allowable 50MHz external clock input
Add to cart
BTS7960B 43A H-Bridge Motor Driver

BTS7960B 43A H-Bridge Motor Driver

Original price was: ₹399.00.Current price is: ₹252.00.
In Stock
  • This is BTS7960B 43A H-Bridge Motor Driver
  • Double BTS7960 large current (43 A) H bridge driver
  • The supply voltage: 5.5V to 27V
  • This has Overtemperature shut down with latch behavior
  • This has Overvoltage lockout and Undervoltage shut down
  • The Driver circuit with logic level inputs.
  • This has an onboard 5V power indicator
  • This has a driver circuit with logic-level inputs.
Add to cart
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable

Original price was: ₹149.00.Current price is: ₹75.00.
In Stock
  1. Output Current: 1.5A (minimum), 2.2A (typ)
  2. Input and output voltage difference (VI-VO): 40Vdc (max)
  3. Adjustable output voltage range: 1.2 ~ 37V
  4. Operating temperature: -55 to +150
  5. Output Current: 1.5A
  6. Input voltage: 4.2 ~ 40 V
Add to cart
Raspberry Pi USB Plug and Play Desktop Microphone

Raspberry Pi USB Plug and Play Desktop Microphone

Original price was: ₹349.00.Current price is: ₹177.00.
In Stock
  1. USB Microphone offers excellent sound quality with any plug-and-play enabled PC or Mac device
  2. Designed to filter out background noises for crisp, clear audio
  3. Neck is adjustable to fit wherever it's needed | USB Cable Length: 4 ft
  4. Plug : USB 2.0;Sensitivity : -67 dBV/pBar,-47 dBV/Pascal +/-4dB
  5. Flexible neck to adjust your convenient direction and Height for talking.
Add to cart
220V AC 2000W SCR Voltage Regulator Motor Speed Controller

220V AC 2000W SCR Voltage Regulator Motor Speed Controller

Original price was: ₹149.00.Current price is: ₹76.00.
In Stock
SKU: AE1020
  1. This is 2000W 220V AC Motor Speed Controller Voltage Regulator
  2. This voltage regulator uses novel bi-directional high-power SCR.
  3. The input voltage of this voltage regulator can be between 110V ~ 220V AC
  4. The output voltage:50V-220V(Output voltage < = Input supply voltage)
  5. The maximum output power is 2000W and the maximum output current is 25A
  6. The size of this SCR is 1.85x1.38x1 inches
  7. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  8. This has High efficiency, high torque, low heat generating
Add to cart
SD Card Module

SD Card Module

Original price was: ₹59.00.Current price is: ₹37.00.
In Stock
  • The level conversion circuit board that can interface level is 5V or 3.3V support micro SD card, micro SDHC card (high-speed card)
  • Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface is a standard SPI interface 4 M2 screw positioning holes for easy installation.
  • Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin Level
  • Conversion Circuit: Micro SD card into the direction of signals into 3.3V, microSD card toward the direction of the control interface
  • MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin
Add to cart
5V 16 Channel Relay Module

5V 16 Channel Relay Module

Original price was: ₹720.00.Current price is: ₹526.00.
In Stock
  • Versatile Control: This 16 Channel 5V Relay Module lets you control up to 16 devices simultaneously.
  • Optocoupler Protection: Equipped with optocoupler protection, it ensures reliable and interference-free operation.
  • Universal Compatibility: Compatible with Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic, and more.
  • Industrial Quality: Integrated with industrial-grade optocouplers for robust performance and anti-jamming ability.
  • Easy to Use: Standard interface and indication LEDs for relay output status make it user-friendly.
  • Multiple Applications: Ideal for microcontroller development, home appliance control, and PLC extended output.
  • Reliable Performance: Made with quality components, this module provides efficient and dependable performance.
Add to cart
12V 4CH Relay Board

12V 4CH Relay Board

Original price was: ₹245.00.Current price is: ₹143.00.
In Stock
  • Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
  • Electromagnetic relays are employed for the protection of various ac and dc equipment.
  • The over/under current and voltage protection of various ac and dc equipment.
Add to cart
2 CH 12V Relay Board

2 CH 12V Relay Board

Original price was: ₹99.00.Current price is: ₹74.00.
In Stock
  • The board is a 2 channel relay which works on 12V.
  • The input signal can come directly from a microcontroller.
  • Each relay can switch the variety of AC or DC high voltage.
  • Current loads working at 110V or 220V AC mains like lights, fans, motors and such
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
In Stock
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Add to cart
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
In Stock
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Add to cart
XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

XIAO Smart Vision AI Camera for Edge AI Applications -Seeed Studio

Original price was: ₹4,099.00.Current price is: ₹3,497.00.
In Stock
  • Smart AI vision camera solution for edge AI applications
  • Integrates Grove Vision AI V2, XIAO ESP32-C3, and OV5647 camera
  • Powered by Himax WiseEye2 platform with Cortex-M55 & Ethos-U55 NPU
  • Supports TensorFlow & PyTorch frameworks
  • Compatible with Arduino IDE for easy development
  • No-code model deployment and real-time inference visualization via SenseCraft AI
  • Comes in a custom 3D-printed enclosure
Add to cart

Filter Products

Categories

Filter by price

Product Status