We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
Filter

Showing 1–16 of 22 resultsSorted by popularity

Sort:
16×2 LCD Module (Green)

16×2 LCD Module (Green)

Original price was: ₹149.00.Current price is: ₹105.00.
In Stock
SKU:007000
  • Dimmable LED backlight with resistor or PWM
  • 16 characters, 2 rows
  • Controlled with 6 digital lines
  • Operates on 2.7V to 5.5V
  • LCD driver power: 3.0V to 11V
  • AC waveform liquid crystal drive
Read more
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Read more
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
Out of stock
SKU:006560
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Read more
MP3 Bluetooth 4.1 Decoder Board

MP3 Bluetooth 4.1 Decoder Board

Original price was: ₹149.00.Current price is: ₹102.00.
Out of stock
SKU:007102
  1. Operating Voltage: 3.7 – 5VDC
  2. SNR: 90dB
  3. Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Read more
Original JHD 20×4 character LCD Display with Blue Backlight

Original JHD 20×4 character LCD Display with Blue Backlight

Original price was: ₹649.00.Current price is: ₹477.00.
Out of stock
SKU:007092
  • This is Original JHD 20×4 character LCD Display with Blue Backlight
  • It is an original JHD LCD display with blue backlight and high quality.
  • The screen can be used for color, LCD, led light bar, and so on, it is easy to install and disassemble without special tools.
  • This module does not require a driver. The LCD screen will display both the character and data.
  • Black text on the Blue background
  • Single LED backlight included can be dimmed easily with a resistor or PWM.
  • Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Read more
LCD Electronic Fish Tank Water Detector Thermometer

LCD Electronic Fish Tank Water Detector Thermometer

Original price was: ₹129.00.Current price is: ₹80.00.
Out of stock
SKU:006938
  1. Temperature range: -50°C ~ +110°C
  2. Temperature display resolution: ±0.1
  3. temperature measurement accuracy: 1°C
  4. Cable Length: 1M
  5. Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
  6. Easy to use, small and handy module.
  7. The module is powered by a pair of LR44 button batteries .
Read more
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
Out of stock
SKU:006555
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Read more
Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Original price was: ₹1,399.00.Current price is: ₹912.00.
Out of stock
SKU:006513
  • Compact and Arduino-compatible development board based on Raspberry Pi RP2040
  • Thumb-sized, surface-mount design for space-saving applications
  • Supports Arduino, MicroPython, and CircuitPython programming
  • Ideal for learning coding, electronics, and prototyping
  • Cost-effective solution with a wide range of compatible libraries
Read more
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Original price was: ₹1,499.00.Current price is: ₹1,097.00.
Out of stock
SKU:006503
  • Compact development board powered by Raspberry Pi RP2350
  • Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
  • Supports MicroPython, C, and C++ development
  • 19 multifunction GPIOs, RGB LED, and Battery Management System
  • Ultra-low power consumption (27μA) with battery power supply
  • Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Read more
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Original price was: ₹1,499.00.Current price is: ₹1,116.00.
Out of stock
SKU:006497
  • Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
  • Bluetooth 5.0
  • Wireless connect
  • Onboard 2 MB flash
  • Embedded machine learning projects
Read more
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

Original price was: ₹399,999.00.Current price is: ₹369,999.00.
In Stock
SKU:006039

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Read more
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

Original price was: ₹344,999.00.Current price is: ₹259,999.00.
In Stock
SKU:006016

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Read more
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

Original price was: ₹224,999.00.Current price is: ₹214,999.00.
In Stock
SKU:006008
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Read more
Bambu Lab X1 – Carbon Combo 3D Printer

Bambu Lab X1 – Carbon Combo 3D Printer

Original price was: ₹249,499.00.Current price is: ₹149,999.00.
In Stock
SKU:005981
  • Multi Color & Multi Material Capability
  • Proven reliability trusted by professionals
  • High quality printing with 7 μm Lidar Resolution
  • High speed CoreXY with 20000 mm/s² Acceleration
  • Dual Auto Bed Leveling
  • The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing.
Read more
Bambu Lab P1S 3D Printer

Bambu Lab P1S 3D Printer

Original price was: ₹56,999.00.Current price is: ₹50,999.00.
In Stock
SKU:005962
  1. Max Build Plate Temp: 100°C
  2. Max Tool Head Speed: 500 mm/s
  3. Max Tool Head Acceleration: 20 m/s
Read more

Filter Products

Categories

Filter by price

Product Status