Filter
Sort:
16×2 LCD Module (Green)

16×2 LCD Module (Green)

Original price was: ₹149.00.Current price is: ₹105.00.
In Stock
SKU:007000
  • Dimmable LED backlight with resistor or PWM
  • 16 characters, 2 rows
  • Controlled with 6 digital lines
  • Operates on 2.7V to 5.5V
  • LCD driver power: 3.0V to 11V
  • AC waveform liquid crystal drive
Add to cart
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Add to cart
Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Seeed Studio XIAO ESP32-S3 Development Board Supports Wi-Fi & Bluetooth 5.0

Original price was: ₹999.00.Current price is: ₹747.00.
Out of stock
SKU:006560
  • Powered by 240MHz Xtensa 32-bit LX7 dual-core processor
  • Supports Wi-Fi & Bluetooth 5.0 connectivity
  • Built-in 2.4GHz rod antenna for a stable signal
  • Ultra-low power consumption with deep sleep mode (14μA)
  • Integrated lithium battery charging management
  • Compact ESP32 S3 development board ideal for IoT and robotics
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Add to cart
MP3 Bluetooth 4.1 Decoder Board

MP3 Bluetooth 4.1 Decoder Board

Original price was: ₹149.00.Current price is: ₹102.00.
Out of stock
SKU:007102
  1. Operating Voltage: 3.7 – 5VDC
  2. SNR: 90dB
  3. Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Read more
Original JHD 20×4 character LCD Display with Blue Backlight

Original JHD 20×4 character LCD Display with Blue Backlight

Original price was: ₹649.00.Current price is: ₹477.00.
Out of stock
SKU:007092
  • This is Original JHD 20×4 character LCD Display with Blue Backlight
  • It is an original JHD LCD display with blue backlight and high quality.
  • The screen can be used for color, LCD, led light bar, and so on, it is easy to install and disassemble without special tools.
  • This module does not require a driver. The LCD screen will display both the character and data.
  • Black text on the Blue background
  • Single LED backlight included can be dimmed easily with a resistor or PWM.
  • Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
Read more
LCD Electronic Fish Tank Water Detector Thermometer

LCD Electronic Fish Tank Water Detector Thermometer

Original price was: ₹129.00.Current price is: ₹80.00.
Out of stock
SKU:006938
  1. Temperature range: -50°C ~ +110°C
  2. Temperature display resolution: ±0.1
  3. temperature measurement accuracy: 1°C
  4. Cable Length: 1M
  5. Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
  6. Easy to use, small and handy module.
  7. The module is powered by a pair of LR44 button batteries .
Read more
LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

LED Driver Board for XIAO Supports 5V and 12V LED Strips -Seeed Studio

Original price was: ₹1,999.00.Current price is: ₹1,497.00.
In Stock
SKU:006555
  • Compact and powerful LED driver board supporting 5V & 12V LED strips
  • Compatible with addressable RGB LEDs: NeoPixel WS2812, WS2813, WS2815
  • Works with all XIAO boards, especially XIAO ESP32 Series
  • Supports smart control via WLED and Home Assistant
  • Offers flexible power options and built-in safety protection
Add to cart
Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Seeed Studio XIAO RP2040 Development Board Supports Arduino,

Original price was: ₹1,399.00.Current price is: ₹912.00.
In Stock
SKU:006513
  • Compact and Arduino-compatible development board based on Raspberry Pi RP2040
  • Thumb-sized, surface-mount design for space-saving applications
  • Supports Arduino, MicroPython, and CircuitPython programming
  • Ideal for learning coding, electronics, and prototyping
  • Cost-effective solution with a wide range of compatible libraries
Add to cart
Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Seeed Studio XIAO RP2350 Development Board Support Micropython / C, C++

Original price was: ₹1,499.00.Current price is: ₹1,097.00.
In Stock
SKU:006503
  • Compact development board powered by Raspberry Pi RP2350
  • Dual Arm Cortex-M33 cores (150 MHz) + dual open-hardware RISC-V cores
  • Supports MicroPython, C, and C++ development
  • 19 multifunction GPIOs, RGB LED, and Battery Management System
  • Ultra-low power consumption (27μA) with battery power supply
  • Compatible with XIAO add-ons: displays, Grove modules, CAN Bus, AI sensors
Add to cart
Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Seeed Studio XIAO nRF52840 Development Board Supports Bluetooth 5.0

Original price was: ₹1,499.00.Current price is: ₹1,116.00.
Out of stock
SKU:006497
  • Powerful CPU: Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz
  • Bluetooth 5.0
  • Wireless connect
  • Onboard 2 MB flash
  • Embedded machine learning projects
Read more
CR 10 Smart 3D Printer

CR 10 Smart 3D Printer

₹44,999.00
In Stock
SKU:006100
  • Print Tech.: FDM
  • Print Size: 300*300*400mm
  • Product Size: 578*522*648mm
  • Printing Precision: ±0.1mm
  • Nozzle Diameter: 0.4mm
  • Hot Bed Temp: ≤100℃
  • Nozzle Temp: ≤260℃
Add to cart
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

Original price was: ₹399,999.00.Current price is: ₹369,999.00.
In Stock
SKU:006039

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Add to cart
Bambu Lab H2D- Combo 2 10W 3D Printer

Bambu Lab H2D- Combo 2 10W 3D Printer

₹329,999.00
In Stock
SKU:006027

This product is available on backorder. Lead time will be 50 days.

  • 3-in-1: 3D printing, 10W laser, pen drawing
  • Multi-material: Flexible, rigid, exotic filaments
  • Precise laser: 0.3mm alignment, cuts up to 5mm
  • Fast printing: Up to 600mm/s, 350°C hotend
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D- Combo 1 3D Printer

Bambu Lab H2D- Combo 1 3D Printer

Original price was: ₹344,999.00.Current price is: ₹259,999.00.
In Stock
SKU:006016

This product is available on backorder. Lead time will be 50 days.

  • Multi-material printing – Flexible, rigid, and exotic filaments.
  • High-speed – Up to 600 mm/s with 350°C hotend.
  • Large build volume – Max 350 × 320 × 325 mm³.
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart
Bambu Lab H2D 3D Printer (Without AMS)

Bambu Lab H2D 3D Printer (Without AMS)

Original price was: ₹224,999.00.Current price is: ₹214,999.00.
In Stock
SKU:006008
  • Dual-nozzle Multi-material 3D Printing
  • 350*320*325 mm³ Print Volume
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Optional 10W/40W Laser and Cutting Module
Add to cart

Filter Products

Categories

Filter by price

Product Status