0
0 items
₹0.00
No products in the cart.
- Clear filters
- Electronic Modules & Display
- Motors, Drivers, Pumps
- Power Supply, Batteries & Accessories
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
Johnson Geared Motor (Grade B) 12 V DC 500 RPM
In Stock
SKU:007614- High-performance Johnson geared motor at an affordable price
- Delivers 500 RPM at 12V DC with 1 kg-cm torque
- Compact, metal gear design for durability and smooth operation
- Features side shaft (off-centered) with metal bushes for wear resistance
- Operates in a voltage range of 6V to 18V
- Ideal for medium torque applications requiring reliable DC motors
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
In Stock
SKU:005697- Voltage range: DC6V – 28V
- Current range: Within 3A
- Switch function: None
- Speed range: 0-100%
- Dimension: 65 x 30 x 15mm
2.8V-5.5V to ±12V DC Conversion Power Module
Out of stock
SKU:009124- Product: DC Conversion Power Module
- Input Voltage Range:2.8V-5.5V
- Output Voltage:+/-12V (V +:+12V;V-:-12V)
- Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
- Size:2.4×1.2cm
12V 4CH Relay Board
In Stock
SKU:006651- Control both ac and dc appliances such as solenoids, motors, lights, fans, etc
- Electromagnetic relays are employed for the protection of various ac and dc equipment.
- The over/under current and voltage protection of various ac and dc equipment.
6-30V 1-Channel Power Relay Module with Adjustable Timing
Out of stock
SKU:008496- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
16×2 LCD Module (Green)
In Stock
SKU:007000- Dimmable LED backlight with resistor or PWM
- 16 characters, 2 rows
- Controlled with 6 digital lines
- Operates on 2.7V to 5.5V
- LCD driver power: 3.0V to 11V
- AC waveform liquid crystal drive
30A Intelligent LCD Solar Controller
In Stock
SKU:008878- Built-in Industrial Micro-Controller
- Big LCD Display
- All Adjustable Parameters
- Full 4 Stage PWM Charge Management
3.7V to 12V Mini DC-DC Boost Step Up Converter Board Module 5V/ 8V/ 9V 12V Output
Out of stock
SKU:009077- Input Voltage:2.5V~VOUT-0.5V
- Output Voltage: can be set to 5V/8V/9V/12V
- The maximum output current reaches 1A.
- Low power consumption.
- The LED indicator can be turned off by the pad next to it.
Buck Converter LM2596HVS DC-DC Buck Converter 4.5-50V to 3-40V
In Stock
SKU:008968- Input voltage: 4.5-50V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
XL4015 5A DC-DC Step Down Adjustable Power Supply
In Stock
SKU:008928- Input voltage range: 4V-38V DC
- Output voltage range: 1.25V-36V DC adjustable.
- Output current: 0-5A.
- Output power: 75W.
- High efficiency up to 96%
- The built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
10 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
LM2596S DC-DC Buck Converter Power Supply
In Stock
SKU:008913- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
5V 1 Channel Relay Module
Out of stock
SKU:008478- Trigger Voltage: 5 VDC
- Trigger Current : 20 mA
- Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
1.8V – 12V/2A DC Motor PWM Speed Regulator
In Stock
SKU:005122- Input supply voltage: 1.8V- 15V DC.
- The maximum output power: 30W
- Output current : 2A(Max).
- With resettable fuse.
- Equipped with LED indicator.
- Potentiometer with switch function for PWM adjustment.

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















