0
0 items
₹0.00
No products in the cart.
- Clear filters
- Mechanical parts & measurement tools
- Power Supply, Batteries & Accessories
- Sensor Modules
TP4056 Adjustable 1A Li-ion lithium Battery Charging Module with Overcurrent Protection – Type C
In Stock
SKU:009844- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
AC-DC Power Supply Module 24V 4A
In Stock
SKU:008461- Input voltage: 85-265 V AC
- Output voltage: 24V DC
- Output current:4A
- Output power:80W
- Frequency:50HZ/60HZ
10 Wire Male to Female Jumper Wires – 20cm
In Stock
SKU:007431- 10P colored jumper wires
- Length: 200mm
- Weight: 10 gm
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
65mm Robot Smart Car 12 Rim Wheel – Blue
In Stock
SKU:007822- 65mm diameter wheel with 25mm width for robot applications.
- Made with durable rubber for excellent traction.
- Features a sturdy nylon-reinforced plastic rim.
- Lightweight design, perfect for various terrains.
- Stylish light blue color enhances robotic designs.
ZMPT101B AC Single Phase Voltage Sensor Transformer Module
In Stock
SKU:006703- Onboard precision miniature voltage transformer
- On-board high-precision op amp circuit, which performs functions such as accurate sampling and proper compensation of signals.
- The module can measure AC voltage within 250V, and the corresponding output analog can be adjusted.
- Sine wave, the middle value (DC component) of the waveform is 1/2VCC.
4PCS Blades Protection Frame Guard Protective Cover for F450 / F550 Propeller
Out of stock
SKU:006592- The quadcopter propeller guards are manufactured with high-quality plastic for a strong and rigid performance.
- These propeller guards for DIY Quadcopter F450 are used as RC parts and accessories.
- They are an important part of drone and quadcopter propellers since they provide great protection and are shock absorbent during a crash.
- Package contains: 4 Pieces of Propeller Guard for Quadcopter F450.
- length: 19cm, width: 30.5cm
20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female 40PCS
In Stock
SKU:007443- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Soil Moisture Sensor Module
In Stock
SKU:005185- Operating voltage: 3.3V to 5V
- Dual output mode for accuracy
- Easy installation with bolt-hole
- Power (red) and digital output (green) indicators
- LM393 comparator chip for stability
DFRobot Gravity Analog Water Pressure Sensor Module
Out of stock
SKU:009427- Measure water pressure accurately with this Arduino water sensor.
- Connect easily with the Gravity 3-pin interface that supports 5V input and 0.5~4.5V output.
- Build smart water systems by combining with solenoid valves and other sensors.
- Detect water presence and measure pressure strength in pipes, tanks, and outdoor water bodies.
- Use in homes, gardens, farms, and even rivers or lakes with its waterproof design.
- Perfect for IoT water pressure monitoring projects and smart home control systems.
- Plug directly into Arduino boards without wiring when used with a Gravity IO Expansion Shield.
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets – 150mm Long
Out of stock
SKU:007591- Qwiic to 0.1″ header cable
- Supports I2C (SDA/SCL)
- Color-coded: 3.3V, GND, SDA, SCL
- Flexible, easy prototyping
10CM Female to Female Breadboard Jumper DuPont 2.54MM 1P-1P Cable 40 Pcs
In Stock
SKU:007437- 40P color DuPont line
- Length: 100mm
- Weight: 25 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic female to female color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
HMC5883L Triple Axis Compass
In Stock
SKU:009446- This compact sensor fits into small projects such as UAVs and robot navigation systems.
- The sensor converts any magnetic field to a differential voltage output on 3 axes.
- This voltage shift is the raw digital output value, which can then be used to calculate headings or sense magnetic fields coming from different directions.
- A development board that provides a simple interface for the HMC5883L (three-axis magnetic field module).
W1209 Digital Temperature Controller Thermostat Module
In Stock
SKU:009233- Get full control over your project with a massive temperature range, from a freezing -50°C all the way to 110°C.
- No need to buy a separate sensor! A high-quality, waterproof temperature probe is already included in the package.
- Setting it up is very simple; just use the simple '+' and '-' buttons, no coding knowledge needed at all.
- Easily connect and control both your home AC appliances and 12V DC devices like fans, coolers, or pumps.
- Fine-tune your system perfectly with advanced options for heating/cooling modes, timer delays, and safety alarms.
- A proper device for students and DIY makers, perfect for building everything from egg incubators to automatic room coolers.
XH-W3001 DC 12V 120W Digital Display LED Temperature Controller with Thermostat Control Switch Probe
In Stock
SKU:009208- The XH-W3001 digital thermostat switch needs a supply voltage of 12V and produces a power of 120W.
- This digital temperature controller is equipped with a 1 metre long stainless waterproof probe that has great resistance against corrosion.
- All the important components of the XH-W3001 digital thermostat are protected in a ABS housing.
- It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃.
- The 12V XH-W3001 temperature controller is best used for heating control in refrigeration and suitable for seafood machines.
STC-3028 Digital Temperature Humidity Controller 110-220V
In Stock
SKU:007163- This is STC-3028 Digital Temperature Humidity Controller 110-220V
- Dual display for temperature and humidity readings
- This can be used with an AM2120 waterproof sensor
- Temperature range of -50℃~110℃
- Refreshing frequency of 0.5s
- This can switch between cool and heat modes
- This has a temperature calibration feature
- Suitable for use in various applications such as sensor control boxes, water heaters, freezers, fans, and refrigerators

We specialize in providing DIY electronics kits and components, empowering makers and hobbyists to build innovative projects. We also develop final year projects for engineering students, delivering hands-on solutions for academic excellence.
Contact Us
Customer Service
Store Information
© 2025 AtomlabIndia. All rights reserved.















