We are currently making some changes on our site and products from our shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
Filter

Showing 1–16 of 21 resultsSorted by popularity

Sort:
Sim800L GSM GPRS Module

Sim800L GSM GPRS Module

Original price was: ₹299.00.Current price is: ₹212.00.
In Stock
SKU:009710
  • This is Sim 800L GSM - GPRS Module
  • Quad-band GSM/GPRS module compatible with global networks (850MHz, 900MHz, 1800MHz, and 1900MHz)
  • Supports GPRS multi-slot class for data transmission (TCP/IP, HTTP, etc.)
  • Compact size and low current consumption, ideal for small projects
  • Interfaces with any microcontroller for GSM functionality
  • Enables making and receiving phone calls
  • Supports sending and receiving SMS messages
  • Includes two antennas for optimal wireless connectivity, one for narrow spaces and one for use with a metal case
  • TTL serial interface with automatic baud rate detection
  • Power-saving features with low current consumption, including sleep mode with as low as 1mA
Read more
Bambu Lab A1 Mini 3D Printer

Bambu Lab A1 Mini 3D Printer

Original price was: ₹22,999.00.Current price is: ₹20,500.00.
In Stock
SKU:005941
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Read more
LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmitter Transmission Module Ai Thinker

Original price was: ₹599.00.Current price is: ₹362.00.
In Stock
SKU:005158
  1. Manufacturer: Ai-Thinker
  2. LoRa  Spread Spectrum modulation technology
  3. Constant RF power output at + 20dBm-100mW voltage change
  4. High sensitivity: down to -148dBm
  5. Half-duplex SPI communication
  6. Programmable bit rates up to 300kbps
  7. Supports FSK, GFSK, MSK, GMSK, LoRa  and OOK modulation modes
Read more
Bambu Lab A1 Combo 3D Printer

Bambu Lab A1 Combo 3D Printer

Original price was: ₹48,999.00.Current price is: ₹46,996.00.
In Stock
SKU:005931
  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
Read more
30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board

30Pin ESP32 Expansion Board with Type-C USB and Micro USB Dual Interface for ESP32 ESP-32 ESP-32S Development Board

Original price was: ₹199.00.Current price is: ₹125.00.
In Stock
SKU:005855
  1. Power supply: DC 6.5-16v and USB 5V
  2. GVS output power supply: 5V or 3.3V
  3. No. Of Pins: 30PIN
  4. Processor Count: ‎2
Read more
HC-05 Bluetooth Module

HC-05 Bluetooth Module

Original price was: ₹349.00.Current price is: ₹225.00.
In Stock
SKU:006984
  • Provide seamless wireless communication in various applications like GPS navigation systems, water meter readings, and electricity gas meter readings.
  • This Bluetooth module allows you to easily switch between Master and Slave modes using AT Commands.
  • Connect effortlessly with a wide range of devices such as Arduino, phones, laptops, and microcontrollers for a competitive price.
  • The module uses USART for communication, making it compatible with microcontrollers supporting USART.
  • You can easily configure the module's settings using the command mode, giving you control over your wireless connections.
  • Perfect for connecting computers, mobile phones, and microcontrollers for data exchange and DIY, IoT, and Robotics Projects
Read more
NEO-6M GPS Module with EPROM

NEO-6M GPS Module with EPROM

Original price was: ₹399.00.Current price is: ₹237.00.
In Stock
SKU:006664
  1. 5Hz position update rate.
  2. The cold start time of 38 s and Hot start time of 1 s.
  3. Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
  4. Super Sense Indoor GPS: -162 dBm tracking sensitivity.
  5. Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
  6. Separated 18 x 18mm GPS antenna.
Read more
GSM SIM800C Modem with Antenna

GSM SIM800C Modem with Antenna

Original price was: ₹1,299.00.Current price is: ₹1,052.00.
In Stock
SKU:006150
  • Supply Voltage (V): 3.4 ~ 12
  • GSM (MHz): 850, 900, 1800 and 1900
  • Flash Memory (MB): 24
  • RAM Memory (MB): 32
Read more
RF433 MHz Transmitter Receiver Wireless Module

RF433 MHz Transmitter Receiver Wireless Module

Original price was: ₹170.00.Current price is: ₹110.00.
In Stock
SKU:006138
  • Range in open space: 30 Meters
  • RX IF Frequency: 1MHz
  • Very Stable Operating Frequency
  • Low Current Consumption (Typ 11mA)
  • Wide Operating Voltage (1.5-5v)
Read more
RF Transmitter Receiver Module 433MHz Wireless Link Kit

RF Transmitter Receiver Module 433MHz Wireless Link Kit

Original price was: ₹100.00.Current price is: ₹87.00.
In Stock
SKU:006135
  • Operating voltage: 5V.
  • Quiescent Current: 4mA.
  • Receiving frequency: 433 MHz.
  • Receiver sensitivity: -105 dB.
  • Communication Distance (m): 20 ~ 200 meter.
Read more
CR 10 Smart 3D Printer

CR 10 Smart 3D Printer

₹44,999.00
In Stock
SKU:006100
  • Print Tech.: FDM
  • Print Size: 300*300*400mm
  • Product Size: 578*522*648mm
  • Printing Precision: ±0.1mm
  • Nozzle Diameter: 0.4mm
  • Hot Bed Temp: ≤100℃
  • Nozzle Temp: ≤260℃
Read more
Bambu Lab H2D- Combo 2 40W 3D Printer

Bambu Lab H2D- Combo 2 40W 3D Printer

Original price was: ₹399,999.00.Current price is: ₹369,999.00.
In Stock
SKU:006039

This product is available on backorder. Lead time will be 50 days.

  • Dual-nozzle Multi-material 3D Printing
  • Optional 10W/40W Laser and Cutting Module
  • 350*320*325 mm³ Print Volume
  • 5μm Resolution Optical Motion Calibration
  • Closed-loop Servo Extruder
  • 350°C Nozzle & 65°C Active Chamber Heating
  • Voltage Range: 100-120 V
Read more
Bambu Lab X1 – Carbon Combo 3D Printer

Bambu Lab X1 – Carbon Combo 3D Printer

Original price was: ₹249,499.00.Current price is: ₹149,999.00.
In Stock
SKU:005981
  • Multi Color & Multi Material Capability
  • Proven reliability trusted by professionals
  • High quality printing with 7 μm Lidar Resolution
  • High speed CoreXY with 20000 mm/s² Acceleration
  • Dual Auto Bed Leveling
  • The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing.
Read more
Bambu Lab P1S 3D Printer

Bambu Lab P1S 3D Printer

Original price was: ₹56,999.00.Current price is: ₹50,999.00.
In Stock
SKU:005962
  1. Max Build Plate Temp: 100°C
  2. Max Tool Head Speed: 500 mm/s
  3. Max Tool Head Acceleration: 20 m/s
Read more
Bambu Lab P1S Combo 3D Printer

Bambu Lab P1S Combo 3D Printer

Original price was: ₹77,499.00.Current price is: ₹67,999.00.
In Stock
SKU:005958
  1. Max hot end temp: 300°C
  2. Compatible with multiple Bambu plates
  3. Max build plate temp: 100°C
  4. Max tool head speed: 500 mm/s
  5. Max tool head acceleration: 20 m/s²

Read more
Bambu Lab A1 Mini Combo 3D Printer with AMS Lite

Bambu Lab A1 Mini Combo 3D Printer with AMS Lite

Original price was: ₹42,999.00.Current price is: ₹36,342.00.
In Stock
SKU:005944
  • Multi-Color Printing with AMS Lite
  • Plug-N-Play Convenience
  • Active Flow Rate Compensation
  • Full Auto Calibration
  • Active Motor Noise Cancelling
  • High-Speed Precision
  • Active Flow Rate Compensation
Read more

Filter Products

Categories

Filter by price

Product Status